Haier ESA424K, ESA418M, ESA415M user manual Location Requirements, Window Installation

ENGLISH

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and ordinances. Check the location where the air conditioner will be installed. Make sure you have everything necessary for correct installation.

The site of installation should provide:

•A grounded electrical outlet within 4 ft. (122 cm) of where the power cord exits the air conditioner.

NOTE: Do not use an extension cord, plug adapter, surge protector or multi-outlet adapter.

•Free movement of air in the room to be cooled.

•A large enough opening for the air conditioner.

•Unit must not be installed in a through-the-wall sleeve.

NOTE: The outside cabinet louvers must not be obstructed by bushes, trees, etc. Air must be able to pass freely through the cabinet louvers.

WINDOW INSTALLATION

Models

ESA415M ESA418M

28-3/8” minimum to 38” maximum opening width

17-3/8” minimum opening height

Model

ESA424K

31-1/4” minimum to 40” maximum opening width

20-1/4” minimum opening height

WARNING

•Electrical shock hazard

•Plug into a mating, grounded 3 prong outlet.

•Do not remove the ground prong from the power supply cord.

•Do not use a plug adapter, extension cord, surge protector, or multi-outlet adapter

•Failure to follow these instructions can result in injury, fire, or electrical shock.

To test your power supply cord:

1.Plug power supply cord into a mating, grounded 3 prong outlet.

2.Press RESET (on some devices, a green light will turn on).