COMPLETING THE INSTALLATION: ESA415 / ESA418
ENGLISH
COMPLETE THE INSTALLATION
1.Uncoil the included foam seal. (See Fig.14)
2.Insert the foam seal behind the top of the lower window sash and against the glass of the upper window. (See Fig.15)
Fig. 14
A. Top of lower window sash
B. Foam seal
3.Place the window lock bracket as shown. Use a 1⁄8” drill bit to drill a starter hole through the hole in the window lock bracket and into the upper window sash. (See Fig.16)
4.Attach the window lock bracket to the upper window with one (1) 1” wood screw to secure the window in place. (See Fig.16)
(A)Top of lower window sash
(B)Foam seal
Fig. 15
INSTALLING THE CHASSIS TO THE CABINET (See Fig.17)
When moving or lifting the air conditioner chassis, use two or more people. Wear gloves when handling the air conditioner to protect against possible sharp edges and metal fins.
1.Pick up the chassis carefully and evenly.
2.Slide the chassis into the cabinet. (See Fig.17)
3.Reinstall the front panel.
4.Secure the front panel to the chassis using the screws removed at the start of the installation. (A) (See Fig.18)
Fig. 16
Window Lock Bracket
5.Reinstall two of the screws removed from the cabinet at the start of the installation. (B) (See Fig.18)
6.Plug the unit in. Press RESET on the power supply cord. A green light will come on. See “Electrical Requirements."
Fig. 17 | Fig. 18 |
|
|
B
B A
HOW TO INSTALL | PAGE 15 |