JVC hr-dvs3u Plug & Play Set, 14 EN, Auto Clock Set/Auto Tuner Set, Perform Plug & Play setup

Page 14

14 EN

INITIAL SETTINGS

Plug & Play Set

Auto Clock Set/Auto Tuner Set

ATTENTION:

●If you use a cable box, Plug&Play will not function; set the clock and tuner channels separately. ( pg. 16 – 19)

●Depending on areas or reception conditions, the VCR may not receive the Auto clock setting data from the PBS channel. If this function is taking a considerable amount of time, it may be necessary to perform the Semiauto or Manual Clock Set procedure.

This VCR sets the clock and tuner channels automatically when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting.

The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels. We call this TV channel the “host channel” and it is a PBS channel in your area.

A Perform Plug & Play setup.

Connect the antenna cable to the VCR ( pg. 12). Then connect the AC power cord to an AC outlet. Do not turn on the VCR.

The clock and tuner channels will be set automatically.

1

3

2

NOTES:

●Auto Clock Set is performed first.

“Auto” blinks on the front display panel during Auto Clock Set.

●Auto Channel Set is performed next. Auto Channel Set scans all the channels that are receivable by your VCR. During Auto Channel Set, the channel numbers are displayed as they are scanned and set.

●When Plug & Play setting has been complete successfully, the correct clock time is displayed. If you perform Plug & Play

setting successfully, there is no need to perform “Clock Set”

( pg. 16) and “Tuner Set” ( pg. 18). If, however, you want

to add or delete channels, refer to “Manual Channel Set” ( pg. 19).

During Initial Auto Clock Set

During Auto Channel Set

Plug&Play Completed

“Auto” blinks.

The channel numbers are displayed

The current time is displayed.

 

as they are scanned and set.

 

* If an incorrect clock time or “– –:– –” appears on the display panel, see “What to do if Plug & Play setting failed” below.

INFORMATION

●If “AUTO CLOCK” is set to “ON” ( pg. 17), the clock will be adjusted automatically by the host channel every hour (except 11:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming PBS channel clock setting data. (This automatic clock

adjustment can only be performed when the VCR is turned off. The clock will be adjusted just on these hours — on the time displayed on the front display panel, not on the actual real time.) The default setting of “AUTO CLOCK” is “ON”. ( pg. 17)

●If the memory backup fails, because a power outage occurs or because the AC power cord is unplugged, Plug & Play will be performed when power is restored to the VCR.

What to do if Plug & Play setting failed

●If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform “Semiauto Clock Set” ( pg. 17) or “Manual Clock Set” ( pg. 17).

●If “– –:– –” appears on the front display panel, your antenna cable may not be connected to the VCR or there may not be a Host PBS signal available in your area. Ensure that the antenna cable is connected correctly. Then turn on and off the VCR; the Plug &

Play setting will be automatically reactivated. If Plug & Play setting is not performed though the antenna cable is connected correctly, perform “Manual Clock Set” ( pg. 17) and “Auto Channel Set” ( pg. 18) or “Manual Channel Set” ( pg. 19).

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Video Cassette Recorder For Customer UseDear Customer Moisture CondensationImportant Product Safety Instructions Damage Requiring Service AccessoriesCleaning Replacement PartsContents Front View Rear View Front Display Panel How To Use RemoteTo recall an indication 10 ENON-SCREEN Display for VHS deck Press DISPLAY/OSDON-SCREEN Display for DV deck 12 EN Check the contentsConnect the VCR to power source Situate the VCR8To connect to a TV with S-VIDEO/AUDIO input connectors Video ConnectionPlug & Play Set Perform Plug & Play setupWhat to do if Plug & Play setting failed 14 ENLanguage 16 EN Access the Clock Set screenClock Set PreparationsSemiauto Clock Set Manual Clock Set18 EN Access the Tuner Set screenTuner Set Auto Channel SetTo add channels Manual Channel SetAdd or skip the desired channels To skip channelsInstalling Controller 20 ENSelect the cable box’s channel Access the Cable Box Set screenTurn on the cable box If you do not use a cable box, press rt until OFFPress OK or e 22 ENEnter the cable box’s brand If the cable box’s channel does not change toDBS receiver If your DBS receiver has audio/video output connectorsHow to control the DBS receiver Select the DBS receiver’s channel Setting DBS receivers brand and channelTurn on the DBS receiver If you do not use a DBS receiver, press rt until OFFEnter the DBS receiver’s brand If the DBS receiver’s channel does not change as shown aboveVHS deck Basic Playback26 EN Start recording Choose a programSet the tape speed Pause/Resume recordingPause during playback 28 ENSlow Motion On the VCR Activate frame-by-frame playbackSlow Motion On the Remote Variable Speed Search On the RemoteRepeat Playback 30 ENIndex Search Next Function MemorySoundtrack Selection Adjust the tracking manuallyManual Tracking Override automatic trackingRecord One Program While Watching Another Instant Timer Recording ITR32 EN Tape Remaining Time Reset the counterPress C.RESET before starting recording or playback Set the counter displaySecond Audio Recording 34 ENRetake Recording Active Video CalibrationPlayback Select the DV deck 36 ENDV deck Press DVDV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code 42 EN Access the PlusCode No. screenAccess the VCR Plus+ Program screen Select the deckFor the DV deck Engage the VCR’s timer modeFor the VHS deck Cable Box or DBS Receiver UsersGuide Channel Number Set Access the Guide Channel Set screen44 EN Enter the Guide Channel numberGuide Channel Number Enter the receiving channel position numberExpress Timer Programing 46 ENPress DATE+ Enter the program dateEnter the channel position Press CH+48 EN Enter the program mode24HR Quick Programing Set the program start/stop time and channelPage Cancel or change a program Disengage the timer modeAccess the Program Check screen Return to the timer modeSelect the program to modify Cancel or change program settingConfirm the overlapping programs Overlapping programs blink on the TV screenFrom DV to VHS Tape Dubbing52 EN Dubbing An Entire CassetteFrom VHS to DV Press DV, then press SP/LP pPrepare the VHS deck for dubbing 54 ENLocate the start point on the DV deck Pause dubbingLocate the start point on the VHS deck Prepare the DV deck for dubbing56 EN Recorder PlayerStart the source player Set the input mode of recording deck58 EN Start the recording deckPC with DV connector Connection to a PC with DV connectorExample When using this VCR as the source player Connection to another VCRVHS Audio Dubbing Audio Dubbing60 EN DV Audio DubbingPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing VHS Insert Editing Insert Editing62 EN Source tapePrepare the recording cassette Engage the Insert Editing modeAV Insert Editing VHS deck only Start EditingSelect the program Access the R.A.Edit screen64 EN Press R.A.EDIT. The R.A.Edit screen appearsStart Random Assemble Editing Locate the end pointPrepare the source tape End Random Assemble EditingChange the code for VCR Remote A/B Code Switching66 EN To control two VCRs with the same RemoteOperate the TV TV Multi-Brand Remote ControlSet the TV brand code Before performing the following stepsSet the Cable Box brand code Press the corresponding button Power68 EN Operate the Cable BoxOperate the DBS receiver DBS Receiver Multi-Brand Remote ControlSet the DBS receiver brand code Select the mode Mode SetAccess the Mode Set screen Select the mode settingMode SET When this function is set to onVHS Mode SET 72 ENVHS Mode SET 74 EN For ExampleNormally select this. Hi-Fi sound is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Sound on the left Hi-Fi channel is played backDV Mode SET 76 ENPower 78 EN RecordingVHS deck DV deckTimer Recording 80 ENRecording Timer RecordingPlayback 82 EN Express Timer Programming Cable box Cable Box Control SettingChanging VCR Plus+ Setting VCR Plus+ Timer ProgramingHOW to Locate Your JVC Service Center 84 ENWarranty Only in U.S.A 86 EN
Related manuals
Manual 88 pages 19.11 Kb
Top Page Image Contents