JVC hr-dvs3u manual 20 EN, Installing Controller

Page 20

20 EN

INITIAL SETTINGS (cont.)

Cable Box Control Setting

Place the cable box on top of the VCR. Attach the VCR's Controller to the top of the VCR with the Controller’s transmitter pointed towards the cable box’s remote sensor.

ATTENTION:

The Controller can also control a DBS receiver. If both a cable box and a DBS receiver are used, position the Controller so its signal reaches the remote sensors of both the cable box and DBS receiver.

The following procedure is required if you receive your TV channels through a cable box (descrambler). The Controller allows the VCR to automatically switch the cable box channel during timer recording. The Controller is effective for recording broadcasts that have been programed using “VCR Plus+® Timer Programing”

( pg. 42) or “Express Timer Programing” ( pg. 46).

Installing Controller

A Situate the Controller.

Place the Controller so that the path between its transmitter and the cable box’s remote sensor is unobstructed.

Your VCR

Cable box

Controller (suggested locations)

B Attach the Controller.

Fix securely using the adhesive strip attached on the back of the Controller.

C Make connections.

If your cable box does not have audio/video output connectors

Connect the RF output connector on the cable box to the ANTENNA IN connector on the rear of your VCR.

If your cable box has audio/video output connectors

Connect an audio/video cable between the AUDIO/ VIDEO IN connectors on the rear of the VCR and the

Cable box

	To RF output	To Audio/
		video
Controller		output
Controller	Transmitter
	Transmitter
		or
	To	To
	ANTENNA	AUDIO/
	IN	VIDEO IN

Your VCR

CABLE

BOX

audio/video output connectors on the cable box.

NOTE:

When connecting your cable box, refer to its instruction manual.

D Connect the Controller to VCR.

Connect the Controller to the CABLE BOX connector on the rear panel.

How to control the cable box

This VCR has two separate methods to control your cable box.

●The VCR’s wireless Remote can control your cable box. This eliminates the need for a separate cable box’s Remote.

●The VCR’s Controller can also control your cable box. This allows the VCR to change your cable box’s channel

number during timer recording.

Each method must be set up separately. To set up the VCR’s Remote, refer to page 68. To set up the Controller, go to page 21.

Image 20

Contents Video Cassette Recorder For Customer UseDear Customer Moisture CondensationImportant Product Safety Instructions Accessories CleaningDamage Requiring Service Replacement PartsContents Front View Rear View Front Display Panel How To Use Remote10 EN ON-SCREEN Display for VHS deckTo recall an indication Press DISPLAY/OSDON-SCREEN Display for DV deck Check the contents Connect the VCR to power source12 EN Situate the VCR8To connect to a TV with S-VIDEO/AUDIO input connectors Video ConnectionPerform Plug & Play setup What to do if Plug & Play setting failedPlug & Play Set 14 ENLanguage Access the Clock Set screen Clock Set16 EN PreparationsSemiauto Clock Set Manual Clock SetAccess the Tuner Set screen Tuner Set18 EN Auto Channel SetManual Channel Set Add or skip the desired channelsTo add channels To skip channelsInstalling Controller 20 ENAccess the Cable Box Set screen Turn on the cable boxSelect the cable box’s channel If you do not use a cable box, press rt until OFF22 EN Enter the cable box’s brandPress OK or e If the cable box’s channel does not change toDBS receiver If your DBS receiver has audio/video output connectorsHow to control the DBS receiver Setting DBS receivers brand and channel Turn on the DBS receiverSelect the DBS receiver’s channel If you do not use a DBS receiver, press rt until OFFEnter the DBS receiver’s brand If the DBS receiver’s channel does not change as shown aboveVHS deck Basic Playback26 EN Choose a program Set the tape speedStart recording Pause/Resume recording28 EN Slow Motion On the VCRPause during playback Activate frame-by-frame playbackSlow Motion On the Remote Variable Speed Search On the Remote30 EN Index SearchRepeat Playback Next Function MemoryAdjust the tracking manually Manual TrackingSoundtrack Selection Override automatic trackingRecord One Program While Watching Another Instant Timer Recording ITR32 EN Reset the counter Press C.RESET before starting recording or playbackTape Remaining Time Set the counter displaySecond Audio Recording 34 ENRetake Recording Active Video CalibrationPlayback 36 EN DV deckSelect the DV deck Press DVDV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code Access the PlusCode No. screen Access the VCR Plus+ Program screen42 EN Select the deckEngage the VCR’s timer mode For the VHS deckFor the DV deck Cable Box or DBS Receiver UsersAccess the Guide Channel Set screen 44 ENGuide Channel Number Set Enter the Guide Channel numberGuide Channel Number Enter the receiving channel position numberExpress Timer Programing 46 ENEnter the program date Enter the channel positionPress DATE+ Press CH+Enter the program mode 24HR Quick Programing48 EN Set the program start/stop time and channelPage Disengage the timer mode Access the Program Check screenCancel or change a program Return to the timer modeCancel or change program setting Confirm the overlapping programsSelect the program to modify Overlapping programs blink on the TV screenTape Dubbing 52 ENFrom DV to VHS Dubbing An Entire CassetteFrom VHS to DV Press DV, then press SP/LP p54 EN Locate the start point on the DV deckPrepare the VHS deck for dubbing Pause dubbingLocate the start point on the VHS deck Prepare the DV deck for dubbing56 EN Recorder PlayerSet the input mode of recording deck 58 ENStart the source player Start the recording deckConnection to a PC with DV connector Example When using this VCR as the source playerPC with DV connector Connection to another VCRAudio Dubbing 60 ENVHS Audio Dubbing DV Audio DubbingPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing Insert Editing 62 ENVHS Insert Editing Source tapeEngage the Insert Editing mode AV Insert Editing VHS deck onlyPrepare the recording cassette Start EditingAccess the R.A.Edit screen 64 ENSelect the program Press R.A.EDIT. The R.A.Edit screen appearsLocate the end point Prepare the source tapeStart Random Assemble Editing End Random Assemble EditingRemote A/B Code Switching 66 ENChange the code for VCR To control two VCRs with the same RemoteTV Multi-Brand Remote Control Set the TV brand codeOperate the TV Before performing the following stepsPress the corresponding button Power 68 ENSet the Cable Box brand code Operate the Cable BoxOperate the DBS receiver DBS Receiver Multi-Brand Remote ControlSet the DBS receiver brand code Mode Set Access the Mode Set screenSelect the mode Select the mode settingMode SET When this function is set to onVHS Mode SET 72 ENVHS Mode SET 74 EN For ExampleCorrection to the luminance signal to enhance details Selecting either HI-FI L or HI-FI RNormally select this. Hi-Fi sound is played back Sound on the left Hi-Fi channel is played backDV Mode SET 76 ENPower 78 EN RecordingVHS deck DV deckTimer Recording 80 ENRecording Timer RecordingPlayback 82 EN Cable box Cable Box Control Setting Changing VCR Plus+ SettingExpress Timer Programming VCR Plus+ Timer ProgramingHOW to Locate Your JVC Service Center 84 ENWarranty Only in U.S.A 86 EN

Related manuals

Manual 88 pages 19.11 Kb