JVC hr-dvs3u manual Active Video Calibration, Playback, Recording

Page 35

EN 35

Active Video

Calibration

(VHS deck)

Active Video Calibration checks the condition of the tape in use during playback and recording, and compensates to provide the highest-possible playback and recording pictures. You can set “VIDEO CALIBRATION” to “ON” or “OFF” to your preference ( pg. 73).

Playback

The VCR assesses the quality of the tape once you initiate playback.

● The VCR adjusts the playback picture quality based on the quality of the tape in use.

Recording

The VCR assesses the quality of the tape once you initiate recording.

●The VCR spends approximately 7 seconds assessing the condition of the tape, then begins recording.

NOTES:

●The Video Calibration works for both SP and EP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

●In the case of timer recordings, the Video Calibration works before recording is initiated.

●Once the cassette is ejected, the Video Calibration data is cancelled. The next time the cassette is used for recording, Video Calibration is re- performed.

DURING VIDEO

CALIBRATION

VIDEO CALIBRATION COMPLETE

●Video Calibration is active during automatic tracking. The Video Calibration screen appears blinking on the TV screen.

NOTES:

●When watching a tape recorded with “VIDEO CALIBRATION” set to “ON”, it is recommended that you leave VIDEO CALIBRATION on during playback as well.

●When watching a rental tape or one recorded on another VCR,

or when using this VCR as the player for editing, set VIDEO CALIBRATION to your preference ( pg. 73).

●The Video Calibration screen only appears at the beginning of automatic tracking. Even though it doesn’t appear after that, the Video Calibration function is operative.

ATTENTION

Since the Video Calibration works before recording actually starts, there is a delay of approximately 7 seconds after REC (7) and PLAY (4) on the Remote are pressed, or

REC (7) on the VCR is pressed. To make sure you record the desired scene or program in its entirety, first perform the following steps:

APress and hold PAUSE (9) and press REC (7) to engage the Record Pause mode.

●The VCR then automatically checks the condition of the tape and, after approximately 7 seconds, re-enters Record Pause mode.

BPress PLAY (4) to start recording.

If you want to bypass the Video Calibration and begin recording immediately, set “VIDEO CALIBRATION” to “OFF” ( pg. 73).

Page 34 Page 36
Image 35
Page 34 Page 36
Contents For Customer Use Video Cassette RecorderMoisture Condensation Dear CustomerImportant Product Safety Instructions Replacement Parts AccessoriesCleaning Damage Requiring ServiceContents Front View Rear View Front Display Panel Remote How To UsePress DISPLAY/OSD 10 ENON-SCREEN Display for VHS deck To recall an indicationON-SCREEN Display for DV deck Situate the VCR Check the contentsConnect the VCR to power source 12 ENVideo Connection 8To connect to a TV with S-VIDEO/AUDIO input connectors14 EN Perform Plug & Play setupWhat to do if Plug & Play setting failed Plug & Play SetLanguage Preparations Access the Clock Set screenClock Set 16 ENManual Clock Set Semiauto Clock SetAuto Channel Set Access the Tuner Set screenTuner Set 18 ENTo skip channels Manual Channel SetAdd or skip the desired channels To add channels20 EN Installing ControllerIf you do not use a cable box, press rt until OFF Access the Cable Box Set screenTurn on the cable box Select the cable box’s channelIf the cable box’s channel does not change to 22 ENEnter the cable box’s brand Press OK or eDBS receiver If your DBS receiver has audio/video output connectorsHow to control the DBS receiver If you do not use a DBS receiver, press rt until OFF Setting DBS receivers brand and channelTurn on the DBS receiver Select the DBS receiver’s channelIf the DBS receiver’s channel does not change as shown above Enter the DBS receiver’s brandVHS deck Basic Playback26 EN Pause/Resume recording Choose a programSet the tape speed Start recordingActivate frame-by-frame playback 28 ENSlow Motion On the VCR Pause during playbackVariable Speed Search On the Remote Slow Motion On the RemoteNext Function Memory 30 ENIndex Search Repeat PlaybackOverride automatic tracking Adjust the tracking manuallyManual Tracking Soundtrack SelectionRecord One Program While Watching Another Instant Timer Recording ITR32 EN Set the counter display Reset the counterPress C.RESET before starting recording or playback Tape Remaining TimeSecond Audio Recording 34 ENRetake Recording Active Video CalibrationPlayback Press DV 36 ENDV deck Select the DV deckDV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code Select the deck Access the PlusCode No. screenAccess the VCR Plus+ Program screen 42 ENCable Box or DBS Receiver Users Engage the VCR’s timer modeFor the VHS deck For the DV deckEnter the Guide Channel number Access the Guide Channel Set screen44 EN Guide Channel Number SetEnter the receiving channel position number Guide Channel Number46 EN Express Timer ProgramingPress CH+ Enter the program dateEnter the channel position Press DATE+Set the program start/stop time and channel Enter the program mode24HR Quick Programing 48 ENPage Return to the timer mode Disengage the timer modeAccess the Program Check screen Cancel or change a programOverlapping programs blink on the TV screen Cancel or change program settingConfirm the overlapping programs Select the program to modifyDubbing An Entire Cassette Tape Dubbing52 EN From DV to VHSPress DV, then press SP/LP p From VHS to DVPause dubbing 54 ENLocate the start point on the DV deck Prepare the VHS deck for dubbingPrepare the DV deck for dubbing Locate the start point on the VHS deck56 EN Player RecorderStart the recording deck Set the input mode of recording deck58 EN Start the source playerConnection to another VCR Connection to a PC with DV connectorExample When using this VCR as the source player PC with DV connectorDV Audio Dubbing Audio Dubbing60 EN VHS Audio DubbingPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing Source tape Insert Editing62 EN VHS Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassettePress R.A.EDIT. The R.A.Edit screen appears Access the R.A.Edit screen64 EN Select the programEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble EditingTo control two VCRs with the same Remote Remote A/B Code Switching66 EN Change the code for VCRBefore performing the following steps TV Multi-Brand Remote ControlSet the TV brand code Operate the TVOperate the Cable Box Press the corresponding button Power68 EN Set the Cable Box brand codeOperate the DBS receiver DBS Receiver Multi-Brand Remote ControlSet the DBS receiver brand code Select the mode setting Mode SetAccess the Mode Set screen Select the modeWhen this function is set to on Mode SET72 EN VHS Mode SETVHS Mode SET For Example 74 ENSound on the left Hi-Fi channel is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Normally select this. Hi-Fi sound is played back76 EN DV Mode SETPower Recording 78 ENDV deck VHS deck80 EN Timer RecordingRecording Timer RecordingPlayback 82 EN VCR Plus+ Timer Programing Cable box Cable Box Control SettingChanging VCR Plus+ Setting Express Timer Programming84 EN HOW to Locate Your JVC Service CenterWarranty Only in U.S.A 86 EN
Related manuals
Manual 88 pages 19.11 Kb
Top Page Image Contents