JVC hr-dvs3u manual Engage the VCR’s timer mode, For the VHS deck, For the DV deck

Page 43

EN 43

G Set the tape speed.

For the VHS deck

Press SP/EP (p).

For the DV deck

Press SP/LP (p).

H Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears on the TV screen, see page 51.

●Repeat steps 3 – 8 for each additional program.

I Engage the VCR’s timer mode.

Press TIMER. The VCR turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press TIMER again.

Cable Box or DBS Receiver Users

To timer-record a cable or satellite broadcast using the VCR plus+ system:

APerform “Cable Box Control Setting” ( pg. 20) or “DBS Receiver Control Setting” ( pg. 23).

BPerform steps 1 – 9.

CLeave the power of cable box or DBS receiver on.

IMPORTANT

If you have moved to a different area or if a broadcasting station's channel number has been changed, the wrong VCR CH or CABLE CH number will be displayed on the VCR Plus+ program screen in step 6. When this happens, set the correct Guide Channel number for that station. ( pg. 44, “Changing VCR Plus+® Setting”)

NOTES:

●To Change The Stop Time . . .

. . . press STOP +/– in step 6. You can compensate for anticipated program schedule delays.

●To Timer-Record Weekly Or Daily Serials . . .

. . . in step 6, press WEEKLY (number key “9”) for weekly serials or DAILY (M–F) (number key “8”) for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

●In case of a power failure after programing, the VCR’s memory backup keeps your selections for approximately 10 minutes.

●You can program each deck to timer-record as many as 6 programs. If you try to program the VCR to record a seventh, “PROGRAM FULL” appears on the TV screen. To record the

extra program, you must first cancel any unnecessary programs ( pg. 50).

●It is not possible to timer-record the same program on both the VHS deck and the DV deck simultaneously.

●During timer recording, it is not possible to change the recording deck (VHS or DV).

●If the times that are programed for recording on the DV deck and on the VHS deck overlap, the earlier start time takes precedence. If the start times are the same, the VHS deck takes precedence.

ATTENTION

Guide Channel Number Set

“GUIDE CHANNEL SET” appears after performing step 6 if the Guide Channel number for the PlusCode number you entered has not been set.

If you want to set the Guide Channel number for the TV or cable station, press number keys or rtto input the channel position number on which your VCR or cable box receives that station, then press OK or e to set the Guide Channel number. VCR Plus+ Program screen appears.

If you receive your channels with a cable box and if you have properly set your Controller, “CABLE CH” appears in place of “VCR CH”. If not, refer to pages 20.

Page 42 Page 44
Image 43
Page 42 Page 44
Contents For Customer Use Video Cassette RecorderMoisture Condensation Dear CustomerImportant Product Safety Instructions Replacement Parts AccessoriesCleaning Damage Requiring ServiceContents Front View Rear View Front Display Panel Remote How To UsePress DISPLAY/OSD 10 ENON-SCREEN Display for VHS deck To recall an indicationON-SCREEN Display for DV deck Situate the VCR Check the contentsConnect the VCR to power source 12 ENVideo Connection 8To connect to a TV with S-VIDEO/AUDIO input connectors14 EN Perform Plug & Play setupWhat to do if Plug & Play setting failed Plug & Play SetLanguage Preparations Access the Clock Set screenClock Set 16 ENManual Clock Set Semiauto Clock SetAuto Channel Set Access the Tuner Set screenTuner Set 18 ENTo skip channels Manual Channel SetAdd or skip the desired channels To add channels20 EN Installing ControllerIf you do not use a cable box, press rt until OFF Access the Cable Box Set screenTurn on the cable box Select the cable box’s channelIf the cable box’s channel does not change to 22 ENEnter the cable box’s brand Press OK or eHow to control the DBS receiver If your DBS receiver has audio/video output connectorsDBS receiver If you do not use a DBS receiver, press rt until OFF Setting DBS receivers brand and channelTurn on the DBS receiver Select the DBS receiver’s channelIf the DBS receiver’s channel does not change as shown above Enter the DBS receiver’s brand26 EN Basic PlaybackVHS deck Pause/Resume recording Choose a programSet the tape speed Start recordingActivate frame-by-frame playback 28 ENSlow Motion On the VCR Pause during playbackVariable Speed Search On the Remote Slow Motion On the RemoteNext Function Memory 30 ENIndex Search Repeat PlaybackOverride automatic tracking Adjust the tracking manuallyManual Tracking Soundtrack Selection32 EN Instant Timer Recording ITRRecord One Program While Watching Another Set the counter display Reset the counterPress C.RESET before starting recording or playback Tape Remaining TimeRetake 34 ENSecond Audio Recording Playback Active Video CalibrationRecording Press DV 36 ENDV deck Select the DV deckDV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code Select the deck Access the PlusCode No. screenAccess the VCR Plus+ Program screen 42 ENCable Box or DBS Receiver Users Engage the VCR’s timer modeFor the VHS deck For the DV deckEnter the Guide Channel number Access the Guide Channel Set screen44 EN Guide Channel Number SetEnter the receiving channel position number Guide Channel Number46 EN Express Timer ProgramingPress CH+ Enter the program dateEnter the channel position Press DATE+Set the program start/stop time and channel Enter the program mode24HR Quick Programing 48 ENPage Return to the timer mode Disengage the timer modeAccess the Program Check screen Cancel or change a programOverlapping programs blink on the TV screen Cancel or change program settingConfirm the overlapping programs Select the program to modifyDubbing An Entire Cassette Tape Dubbing52 EN From DV to VHSPress DV, then press SP/LP p From VHS to DVPause dubbing 54 ENLocate the start point on the DV deck Prepare the VHS deck for dubbingPrepare the DV deck for dubbing Locate the start point on the VHS deck56 EN Player RecorderStart the recording deck Set the input mode of recording deck58 EN Start the source playerConnection to another VCR Connection to a PC with DV connectorExample When using this VCR as the source player PC with DV connectorDV Audio Dubbing Audio Dubbing60 EN VHS Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB Source tape Insert Editing62 EN VHS Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassettePress R.A.EDIT. The R.A.Edit screen appears Access the R.A.Edit screen64 EN Select the programEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble EditingTo control two VCRs with the same Remote Remote A/B Code Switching66 EN Change the code for VCRBefore performing the following steps TV Multi-Brand Remote ControlSet the TV brand code Operate the TVOperate the Cable Box Press the corresponding button Power68 EN Set the Cable Box brand codeSet the DBS receiver brand code DBS Receiver Multi-Brand Remote ControlOperate the DBS receiver Select the mode setting Mode SetAccess the Mode Set screen Select the modeWhen this function is set to on Mode SET72 EN VHS Mode SETVHS Mode SET For Example 74 ENSound on the left Hi-Fi channel is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Normally select this. Hi-Fi sound is played back76 EN DV Mode SETPower Recording 78 ENDV deck VHS deck80 EN Timer RecordingPlayback Timer RecordingRecording 82 EN VCR Plus+ Timer Programing Cable box Cable Box Control SettingChanging VCR Plus+ Setting Express Timer Programming84 EN HOW to Locate Your JVC Service CenterWarranty Only in U.S.A 86 EN
Related manuals
Manual 88 pages 19.11 Kb
Top Page Image Contents