JVC hr-dvs3u manual Slow Motion On the Remote, Variable Speed Search On the Remote

Page 29

EN 29

Still Picture/Frame-By-Frame Playback (On the Remote)

1Pause during playback.

Press PAUSE (9).

2Activate frame-by-frame playback.

Press JOG/SHUTTLE so that the button lights up. Turn the JOG dial to the right for forward frame-by-frame playback, or to the left for reverse frame-by-frame playback.

OR

Press PAUSE (9) to advance a still picture.

OR

Press w for reverse frame-by-frame playback or e for forward frame-by-frame playback.

NOTE:

Still picture playback stops automatically after 5 minutes to protect the heads.

Slow Motion (On the Remote)

Press JOG/SHUTTLE so that the button lights up. During playback or still, turn the SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion. Release to return to still picture.

OR

During still picture, press and hold PAUSE (9) for more than 2 seconds, then release. Press PAUSE (9) and release again to return to still picture.

OR

During still picture, press and hold w or e. Release to return to still picture.

NOTES:

●During slow motion, some noise may appear on the TV screen. Press CH+/– to eliminate the noise. However, the VCR will return to the default setting once a power failure occurs.

●Slow motion playback stops automatically after 5 minutes to protect the heads.

To resume normal playback, press PLAY (4).

You can also use the Remote's JOG dial/SHUTTLE ring for the operations. First press the JOG/SHUTTLE button on the Remote so that the button lights up before use. Refer to the SHUTTLE ring illustration below as you read the procedures.

Reverse

 

 

 

 

Forward

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reverse

 

Reverse

Slow

 

Forward

Reverse

slow

Normal

search

motion

search

play

motion

play

4 steps

2 steps

4 steps

 

2 steps

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

High-Speed (Turbo) Search (On the Remote)

Press JOG/SHUTTLE so that the button lights up. During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search. Releasing SHUTTLE ring resumes still picture playback.

OR

During playback or still, press FF (5) for forward high- speed search, or REW (3) for reverse high-speed search.

NOTE:

For short searches, press and hold FF (5) or REW (3) for over 2 seconds during playback or still picture. When released, normal playback resumes.

Variable Speed Search

(On the Remote)

Press JOG/SHUTTLE so that the button lights up. During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search.

OR

During playback, press w or e.

●The more times you press, the faster the playback picture moves.

●To decrease speed, press the button for the opposite direction.

To resume normal playback, press PLAY (4).

Page 28 Page 30
Image 29
Page 28 Page 30
Contents For Customer Use Video Cassette RecorderMoisture Condensation Dear CustomerImportant Product Safety Instructions Cleaning AccessoriesDamage Requiring Service Replacement PartsContents Front View Rear View Front Display Panel Remote How To UseON-SCREEN Display for VHS deck 10 ENTo recall an indication Press DISPLAY/OSDON-SCREEN Display for DV deck Connect the VCR to power source Check the contents12 EN Situate the VCRVideo Connection 8To connect to a TV with S-VIDEO/AUDIO input connectorsWhat to do if Plug & Play setting failed Perform Plug & Play setupPlug & Play Set 14 ENLanguage Clock Set Access the Clock Set screen16 EN PreparationsManual Clock Set Semiauto Clock SetTuner Set Access the Tuner Set screen18 EN Auto Channel SetAdd or skip the desired channels Manual Channel SetTo add channels To skip channels20 EN Installing ControllerTurn on the cable box Access the Cable Box Set screenSelect the cable box’s channel If you do not use a cable box, press rt until OFFEnter the cable box’s brand 22 ENPress OK or e If the cable box’s channel does not change toDBS receiver If your DBS receiver has audio/video output connectorsHow to control the DBS receiver Turn on the DBS receiver Setting DBS receivers brand and channelSelect the DBS receiver’s channel If you do not use a DBS receiver, press rt until OFFIf the DBS receiver’s channel does not change as shown above Enter the DBS receiver’s brandVHS deck Basic Playback26 EN Set the tape speed Choose a programStart recording Pause/Resume recordingSlow Motion On the VCR 28 ENPause during playback Activate frame-by-frame playbackVariable Speed Search On the Remote Slow Motion On the RemoteIndex Search 30 ENRepeat Playback Next Function MemoryManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic trackingRecord One Program While Watching Another Instant Timer Recording ITR32 EN Press C.RESET before starting recording or playback Reset the counterTape Remaining Time Set the counter displaySecond Audio Recording 34 ENRetake Recording Active Video CalibrationPlayback DV deck 36 ENSelect the DV deck Press DVDV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code Access the VCR Plus+ Program screen Access the PlusCode No. screen42 EN Select the deckFor the VHS deck Engage the VCR’s timer modeFor the DV deck Cable Box or DBS Receiver Users44 EN Access the Guide Channel Set screenGuide Channel Number Set Enter the Guide Channel numberEnter the receiving channel position number Guide Channel Number46 EN Express Timer ProgramingEnter the channel position Enter the program datePress DATE+ Press CH+24HR Quick Programing Enter the program mode48 EN Set the program start/stop time and channelPage Access the Program Check screen Disengage the timer modeCancel or change a program Return to the timer modeConfirm the overlapping programs Cancel or change program settingSelect the program to modify Overlapping programs blink on the TV screen52 EN Tape DubbingFrom DV to VHS Dubbing An Entire CassettePress DV, then press SP/LP p From VHS to DVLocate the start point on the DV deck 54 ENPrepare the VHS deck for dubbing Pause dubbingPrepare the DV deck for dubbing Locate the start point on the VHS deck56 EN Player Recorder58 EN Set the input mode of recording deckStart the source player Start the recording deckExample When using this VCR as the source player Connection to a PC with DV connectorPC with DV connector Connection to another VCR60 EN Audio DubbingVHS Audio Dubbing DV Audio DubbingPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing 62 EN Insert EditingVHS Insert Editing Source tapeAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start Editing64 EN Access the R.A.Edit screenSelect the program Press R.A.EDIT. The R.A.Edit screen appearsPrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble Editing66 EN Remote A/B Code SwitchingChange the code for VCR To control two VCRs with the same RemoteSet the TV brand code TV Multi-Brand Remote ControlOperate the TV Before performing the following steps68 EN Press the corresponding button PowerSet the Cable Box brand code Operate the Cable BoxOperate the DBS receiver DBS Receiver Multi-Brand Remote ControlSet the DBS receiver brand code Access the Mode Set screen Mode SetSelect the mode Select the mode settingWhen this function is set to on Mode SET72 EN VHS Mode SETVHS Mode SET For Example 74 ENSelecting either HI-FI L or HI-FI R Correction to the luminance signal to enhance detailsNormally select this. Hi-Fi sound is played back Sound on the left Hi-Fi channel is played back76 EN DV Mode SETPower Recording 78 ENDV deck VHS deck80 EN Timer RecordingRecording Timer RecordingPlayback 82 EN Changing VCR Plus+ Setting Cable box Cable Box Control SettingExpress Timer Programming VCR Plus+ Timer Programing84 EN HOW to Locate Your JVC Service CenterWarranty Only in U.S.A 86 EN
Related manuals
Manual 88 pages 19.11 Kb
Top Page Image Contents