Sony NW-MS6 Flow Chart of Operations in the Test Mode, Display of Version and Destination

NW-MS6

[Flow Chart of Operations in the Test Mode]

[MENU] key

6.USB self-check

[MENU] key

7.RTC self-check

[MENU] key

[Items to Check in the Test Mode] 1. ROM/RAM Self-check

After entering the test mode, ROM/RAM self-check is performed automatically in the first place. By entering the test mode with key input, however, no RAM check is performed.

1Result of the ROM/RAM check is OK:

The LCD back light turns on, and version and destination is displayed automatically.

2Result of the ROM check is NG:

“BAD ROM” is displayed on the LCD, and the LCD back light keeps blinking.

3Result of the RAM check is NG:

Nothing is displayed on the LCD, and the LCD back light keeps blinking

2.Display of Version and Destination

Version and destination are displayed as follows.

display example

v1.00.03JP

Every time the [DISPLAY] key is pressed, the display changes as “version and destination t LCD all lit t LCD all off t version and destination...”.

Also, pressing the [VOLUME+] key changes the mode to writing destination, and if pressing the [VOLUME--]key, the unit goes into the sleep mode.

11