Playing Discs
Playing Discs
This recorder has two decks. When using the remote, set DECK A/B switch to DECK A for operations on DECK A (the CD/DVD player section), or to DECK B for operations on DECK B (the
In this manual, the CD/DVD player section is just called DECK A, and the
POWER | OPEN/CLOSE A | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AMS ./> |
Connect | H |
headphones |
|
OPEN/ | DECK A/B |
CLOSE | Switch |
H x
1 Turn on the TV and amplifier.
2 Switch the input selector on the TV and amplifier.
3 Press POWER on the recorder.
4 Press A and place a disc on the disc tray of DECK A (or B). Press
Aagain to close the disc tray.
| Playing |
With the playback side facing down | Discs |
| |
5 Press H. |
|
The recorder starts playing. Adjust the volume on the amplifier or the TV.
After following Step 5
Depending on the disc, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. DVD (page 27).
To turn off the recorder
To turn off the recorder, press POWER on the recorder. While playing a disc, do not turn off the recorder by pressing POWER. Doing so may cancel the menu settings.
When you turn off the recorder, first press
xto stop playback and then press POWER on the recorder.
About the symbol display
• Thesymbol will be displayed on the screen if you press a button which cannot be used or enter an incorrect number.
•Some DVD discs may have places
where they do not allow pressing of the STOP, SKIP, or other buttons. The mark will be displayed on the screen if you press a button that is not allowed in such a place.
continued
23US
12/9/01, 6:11 PM