Recording on
Recording a CD to CD-R or CD-RW disc at Normal Speed
(Normal Speed Synchro-Recording)
You can easily make digital recordings from a CD to a
Before recording, see “Notes” on page 48. After recording, you must finalize the disc. Until the disc is properly finalized, it cannot be played on any other machine. See “Finalizing
CD SYNCHRO NORMAL
CD SYNCHRO
NORMAL
1 Press POWER.
2 Press Aof DECK B and place a recordable
With the label side up
“TOC” starts to flash. The recorder starts to read the TOC (Table of Contents) data and shows the type of the disc in the deck on the front panel display.
46US
3 Press Aof DECK A and place a CD on the disc tray. Press Aof DECK A again to close the disc tray.
4 Press CD SYNCHRO NORMAL.
“CD SYNCHRO” appears and “REC” flashes in the front panel display. And the recorder (DECK B) optimizes itself for the best possible recording and “OPC” appears on the display shortly. DECK A will check that digital recording is available.
DECK B stands by for recording, and DECK A stands by for playing.
TRACK | MIN | SEC |
|
DECK A |
| CD SYNCHRO | REC |
| NORMAL |
|
5 If front panel display is displayed as above, it will be ready to record. Press Hon the front panel or on the remote to start recording.
Recording starts. DECK A and DECK B will automatically stop after recording.
1 track CD synchro (Normal speed)
During stop, press AMS (./>) until you find the track after you press CD SYNCHRO NORMAL.
To stop recording
Press x.
Notes
•When copying a disc digitally recorded under control of the Serial Copy Management System (SCMS), the recorder automatically select the analog recording. For detailed explanation on SCMS, refer to the “Notes” on page 49.
•When copying a commercial music CD contains
12/9/01, 6:10 PM