Sony RCD-W7V operating instructions Recording on a CD-R or CD-RW disc Manually, 48US, Press REC z

Page 48

Notes

•You cannot record over existing material. The recorder automatically starts recording from the end of the existing material.

•Make sure that the remaining recordable time on the CD-R or CD-RW is longer than the playing time of the CD, especially if you want to record all the tracks on the CD.

•You cannot pause recording in Synchro-Recording.

•If you set “Program Play,” you cannot use the High Speed Synchro-Recording mode for recording.

•When you select the High Speed Synchro Recording mode during Program Play, the recorder will automatically make a copy at normal speed.

•You cannot use the recording function when you set “Shuffle Play.”

•If an error message appears on the front panel display, refer to “Error Messages” on page 55.

•With the following kinds of CDs, you may experience a reading failure or noise when recorded to a CD-R or CD-RW.

–CD with adhesive labels attached to them

–Irregularly shaped CDs (for example, heart or star shaped)

–CDs with printed text concentrated on one side only

–Old CDs

–Scratched CDs

–Dirty CDs

–Warped CDs

•When “TOC WRITE” flashes in the display, the recorder is currently updating the table of contents (TOC). Do not move the recorder or pull out the AC power cord.

•If the following occurs during CD playback or recording, a reading error may occur or noise may be produced in the recorded results:

–The CD tray or other part of the system is bumped.

–The system is placed on an uneven or soft surface.

–The system is located near a speaker, door, or other source of vibration.

Do not disconnect the recorder from

the power source immediately after

recording.

If you do, recorded material may not be saved to the CD-R or CD-RW. When “BUSY” or “UPDATE” appears in the display, the deck is currently updating track information. When “UPDATE” stops being displayed, it is safe to disconnect the AC power cord.

48US

*RCD-W7V.p65_46-5348

Recording on a CD-R or CD-RW disc Manually

You can start recording from the end of the existing material.

When using the remote, set SELECT to DECK B for operations on DECK B. To perform Synchro-Recording, see “Recording a CD to CD-R or CD-RW disc at Normal Speed” on page 46 or “Recording a CD to CD-R or CD- RW disc at High Speed” on page 46.

INPUT REC z

REC LEVEL

z

1 Turn on the amplifier and set the input selector to the position for the sound source you want to record.

2 Place a recordable CD-R or CD-RW on DECK B.

3 Press INPUT repeatedly to select the input connector.

To record through

Select

DIGITAL OPTICAL IN

OPTICAL

 

 

ANALOG IN

ANALOG

 

 

4 Press REC z.

The recorder stands by for recording.

Note

The manual recorording from DECK A is not available, so use syncro recording method. Refer to page 46-47.

12/9/01, 6:10 PM

RCD-W7V 4-236-407-11(1)

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Compact Disc Recorder Welcome For customers in the U.S.APrecautions Table of Contents 5US About this Manual This Recorder Can Use the Following DiscsTerms for discs Region code Examples of discs that the recorder Cannot playCopyrights CD-RW Synchro-Recording On handling discsIndex to Parts and Controls Front Panel15 14 10US Front Panel Display11US Rear Panel12US RemoteNumber buttons Angle Audio TimeQuick Overview UnpackingInserting Batteries into the Remote 13USVideo cord for connecting a TV monitor supplied Hooking Up the Recorder14US Required cordsConnecting to a TV or an audio system 15USConnecting to a TV equipped with an S-video jack 16USConnecting to a TV and an amplifier with Digital In jack 17US18US 19US Connecting to make reccordings from external source Connecting the AC Power CordConnect the AC power cord to a wall outlet 20USGuide to the Control Menu Display 21USControl Menu Necessary Setup Before Using the Recorder Select the Menu Language using X/x, then press cSelect the language you want using X/x, then press Enter Selecting the Language for On-Screen DisplayPress Power on the recorder Playing Discs23US Again to close the disc tray24US Additional operationsHeadphone jack and Headphone Level control 25US Press TimePlaying DiscsResuming Playback from the Point Where You Stopped the Disc 26USWhile playing a disc, press x to stop playback Using the DVD’s Menu 27USTo move next column, press c using Deck a or AMS Creating Your Own28US Program Program PlayPlaying repeatedly Repeat 29USPlaying in random order 30USShuffle Play To return to repeat play not A-BSelect the desired audio signal using C/c buttons Changing the Sound31US Press DVD Display during playbackTo cancel the Subtitle setting Displaying the Subtitles32US Press X/x to select 1 ENG SubtitleChanging the Angles 3D Surround33US Playing MP3 Discs 34USTips on recording MP3 GlossaryPlaying MP3 Discs Deck a only 35USInsert a disc and close the tray Programmed playback with MP3 36USPress c Press Enter or HPlaying MP3 files repeatedly 37USSearching for a Particular Point on a Disc Scan, Slow 38USMotion Play Watching frame by frame Slow Motion playSearching for a Title/ Chapter/Track 39USPress DVD Display Press X/x to select the search methodUsing the Setup Display Selection of initial settingsPress X/x to select Setup Setup then press Enter To turn off the Setup Menu41US Setting the Password Press X/x to select Password42US Selecting Parental Control Rating LevelsSettings 43USSelecting TV Aspect Press X/x to select TV AspectEach you press ENTER, the setting turns On or OFF in turn 44USOthers Press X/x to select Others45US Selecting the Digital Audio OutputPress X/x to select Digital Audio Output Press Power Recording a CD to CD-R or CD-RW disc at Normal Speed46US Press CD Synchro NormalRecording a CD to CD-R or CD-RW disc at High Speed 47USPress CD Synchro High RecordingRecording on a CD-R or CD-RW disc Manually 48USPress REC z Recorder stands by for recordingFor details, see Adjusting Recording Level below Auto/Manual Track Increment49US Press H Start playing the sound source you want to recordOn the TOC and CD-R/RW indicator Adjusting the Recording Level Analog in onlyChecking the Remaining Recordable Time 50USPress Hwhile the Finalize indicator is flashing Finalizing a CD-R or CD- RW disc51US Press FinalizePress Hwhile the Unfinalize indicator is flashing 52USPress the Erase button twice Unfinalizing a CD-RW discErasing a single track of CD-RW disc Erasing an Entire CD-RW discYou can control your TV using the buttons below Controlling the TV with the Supplied Remote54US Controlling TVs with the remoteError Message System Limitations55US Additional InformationTroubleshooting Power56US Picture57US Operation58US Deck B the CD-R and CD-RW Recording sectionGlossary AdditionalInformation 60US Specifications 61USLanguage Code List 62USLanguage spellings conform to the ISO 639 1988 E/F standard DVD Setup Menu List 63USRCD-W7V.p6555-Rear cover 12/9/01, 609 PM
Top Page Image Contents