Disney DP7000 manual CD Basic Operation, Skip

PLAYBACK OF A CD	CD BASIC OPERATION
	2
1

1
2
Press the Top Cabinet OPEN button 1 and lift up the top	Press the DVD/CD Door OPEN/CLOSE area to open the
cabinet. Slide the Power ON/OFF switch 2 to the ON	disc tray. Insert a disc with the label side facing up on the
position.	disc tray.
3	SEARCH
	1

2
1
	3	1	2
Close the disc tray, the CD will automatically start playing.
The CD track number will appear in the screen for several	During playback, press either the Search √√ 1 or ®®
seconds then disappear from the screen. After 10 seconds,
the screen saver will appear, then after 1.5 minutes, the	button to move the CD forward or backward at double (x2)
screen will go blank (turn off) to save power. Press any	speed to locate a specific section. Repeatedly press these
button to turn the screen on again. To stop playback, press	buttons and the speed will increase to x4, x8, x16 and
the Stop (■) button 1. Because the unit will remember	resume normal playback.
where you stopped, simply press the Play (®) button 2 to	The CD will move forward or backward at high speed until
resume playback where you left off (resuming playback). If	the Play (®) button	3 is pressed; normal playback will
the Stop (■) button 1 is pressed twice, the unit will stop	resume at that point.
completely.

SKIP

1

2

	1
Press the Skip (	) button 1 to advance the unit to the
beginning of the next track.
Press the Skip (	) button 2 to move the unit to the

beginning of the previous track.

17