Ericsson LBI-38732E manual Glossary, 105

Page 105

 

GLOSSARY

agency

- an agency is composed of multiple fleets. Units

 

can be programmed to initiate agency calls to

 

access multiple fleets. (Trunked Mode Only).

Base/Unit Operation- a programmed option used in some fleets so units can only hear and talk to a base dispatch unit, not to other mobiles or personals in the group. In this mode of operation, when a unit in a particular group is talking to the base dispatch unit, all other mobile and personal radios in that group will receive a "System Busy" tone if they try to access the system. (Trunked Mode Only).

control channel

- a radio channel in a trunked system that is used

 

 

to digitally communicate with the radios operat-

 

 

ing on the system when they are not engaged

 

 

in active voice communications.

conventional

-

a radio channel (transmit/receive) that is allo-

channel

 

cated for conventional (non-trunked) use and

 

 

may be manually selected by the operator.

conventional mode

-

communicating on radio channels allocated for

 

 

conventional use.

CCT

- Carrier Controlled Timer - a programmable

 

 

timer that will disable a transmission if the timer

 

 

length is exceeded.

CG

-

Channel Guard - a method of controlling mute

 

 

with a tone or digital code.

Dynamic

-

Dynamic Regrouping is a feature which allows

Regrouping

 

the System Manager to dynamically program

 

 

new groups into selected radios. The System

 

 

Manager develops the regrouping plan and di-

 

 

rects the site controller to send each radio the

 

 

regroup information.

fleet

- a fleet of users consists of multiple groups (sub-

 

 

fleets). Radios can be programmed to make

 

 

fleet calls to simultaneously access multiple

 

 

user groups. (Trunked Mode Only).

105

Page 104 Page 106
Image 105
Page 104 Page 106
Contents LBI-38732E Operator’s Manual Page Table of Contents Edacs Trunked Mode Operation Scanning Conventional Channels Operating Rules and Regulations Safety Information Battery Charging and Care Page For Best Performance Extended Operations FCC Licensing Transceiver ServiceIntroduction User Interface RK II Portable Radio Top And Partial Left Panel Views Buttons and Knobs Page Talk but PUSH-TOTON PTT KeypadGROUP/CHANNEL Selection Page Display SYS Busy MessagesCC Scan Txemer TX Data Sysc on Frcd PVT Status IndicatorsPage Page Universal Device Connector UDC Call Queued Trunked Mode Only Autokey Trunked Mode OnlyAlert Tones Call OriginateCall Denied Trunked Mode Only System Busy Trunked Mode OnlyCarrier Control Timer Low Battery WarningLow Battery Alert Transmit Lockout Key Press AlertOperation Keypad LOCK/UNLOCK Turning on the Radio Y = Z Z Z X X X X XU T H S =L S Y S Menu N U Y Y Y Y Y Y N U K L G H TK L = X X Page Feature Display Feature Encryption Display Serial Number ROM 12 Hex Digits Number Fields Feature Encryption Data StreamProsound Features EnabledSYSTEM/GROUP/CHANNEL Selection System Selection Primary function for these controlsDisplay registers the new system name on line one Group And Channel Selection Home EMERGENCY/HOME Button DefinitionVoice Modes Aegis and Voice Guard OperationClear Modes Aegis Digital ModeDtmf DSP ERR HardwareAegis Private and Voice Guard Private Modes Transferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero Private Operation Receiving An Encrypted CallTransmitting An Encrypted Call Scanned Group Calls Page Receiving a Call Edacs Trunked Mode OperationSending a Call Conventional Failsoft Emergency Operation Scat OperationDeclaring An Emergency Call Receiving An Emergency CallWide Area System Scan Scanning Trunked SystemsProSound Priority System ScanMenu Selection Scanning Trunked Groups Pre-Programmed Keypad KeyAdding Groups To a Scan List Deleting Groups From a Scan ListTurning Scan On Nuisance DeleteTurning Scan Off Programmable Entries Is pressed Individual CallsPage Call Storage Lists Sending An Individual Call Trunked Mode Only Receiving a Telephone Interconnect Call Trunked Mode Only Sending a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Page Portable Data Data Displays Data On Operation Data Off OperationExiting Data Calls Scan Lockout ModeData Lockout Mode ProFile Select OptionMenu Option Option Availability Status Operation STATUS/MESSAGE OperationMessage Operation Dynamic Regroup Operation Edacs Conventional P1 ScanMacro KEY Operation Emergency OperationSquelch Adjust 256K & UP Version Radios only Conventional Mode OperationMenu Selection Receiving a Call Sending a Call Page Tone Encode Transmission Using 5-Tone Signalling For Emergency DeclarationScanning Conventional Channels Adding Channels to a Scan List Nuisance Delete Deleting Channels from a Scan ListTurning Scan OFF Turning Scan onType 99 Decode Conventional only 100 101 Operating Rules and Regulations102 Operating TipsBattery Packs Intrinsically Safe Usage103 104 Accessories105 GlossaryMonitor and receive calls from these groups 106Interconnect 107Page 109 110 Warranty111 NICKEL-CADMIUM Battery WarrantyEmergency Numbers

LBI-38732E specifications

The Ericsson LBI-38732E is a prominent piece of communication equipment that showcases advanced features and cutting-edge technologies intended for enhancing network performance and reliability. This model is part of Ericsson's extensive portfolio designed for telecommunications service providers and enterprises looking for robust and scalable solutions.

One of the main features of the LBI-38732E is its high-capacity processing capabilities. It is engineered to handle large volumes of data traffic, ensuring seamless connectivity even during peak usage times. The processing architecture is optimized for low latency, which is critical for applications requiring real-time responsiveness, such as voice over IP and video conferencing.

The LBI-38732E leverages multiple advanced technologies including Software-Defined Networking (SDN) and Network Functions Virtualization (NFV). These technologies allow operators to enhance their network flexibility and agility, facilitating easier management and deployment of new services. By using SDN, the LBI-38732E enables dynamic resource allocation, which can significantly improve operational efficiency.

In addition, the device supports multi-access edge computing (MEC), bringing processing capabilities closer to the end-user. This functionality reduces latency and enhances user experiences, particularly for applications such as augmented reality, IoT, and real-time analytics.

Another key characteristic of the LBI-38732E is its integration with Ericsson's broader ecosystem of network management tools. This integration ensures operators have access to advanced analytics and monitoring capabilities, enabling proactive maintenance and swift issue resolution. The platform also allows for seamless updates and upgrades, ensuring that the technology stays current with evolving market demands.

Furthermore, the LBI-38732E is designed with security as a fundamental aspect. It includes advanced encryption and authentication features to protect sensitive data and ensure the integrity of communications. These security measures are crucial, especially in an era where cyber threats are increasingly sophisticated.

Overall, the Ericsson LBI-38732E stands out as a versatile and powerful solution for modern telecommunications networks. Its innovative features, combined with robust security and management capabilities, make it a valuable asset for operators aiming to deliver high-quality services while adapting to the rapidly changing technological landscape.
Top Page Image Contents