Ericsson LBI-38732E Using 5-Tone Signalling For Emergency Declaration, Tone Encode Transmission

Page 94

the pre-programmed emergency system and channel to send the emergency sig- nalling and then change back to the se- lected channel.

METHOD 4: Same as METHOD 3 but the radio will lock on to the pre-programmed emergency system and channel. Any attempts to change the channel will be disabled.

The emergency state can be cleared by turning the radio off and then back on.

Using 5-Tone Signalling For Emergency Declaration

If 5-Tone signalling is defined for emergency declara- tion in place of GE-STAR emergency signalling, a pre- programmed tone sequence will be transmitted instead of the GE-STAR sequence. This emergency declaration functions as the GE-STAR emergency in all other re- spects.

TONE ENCODE TRANSMISSION

In conventional mode two keys can be defined to be tone encode triggers. If one of the pre-programmed tone encode triggers is pressed, a pre-programmed tone se- quence will be transmitted on the current system and channel. (See Emergency Operation if EMER- GENCY/HOME button is used.) The XMIT indicator will light during tone transmission and a beep will sound at the end of the transmission. If enabled, audible side tones will be heard in the radio speaker as well. If PTT is pre-programmed as one of the triggers, the microphone

94

Page 93 Page 95
Image 94
Page 93 Page 95
Contents LBI-38732E Operator’s Manual Page Table of Contents Edacs Trunked Mode Operation Scanning Conventional Channels Operating Rules and Regulations Safety Information Battery Charging and Care Page For Best Performance Extended Operations Transceiver Service FCC LicensingIntroduction User Interface RK II Portable Radio Top And Partial Left Panel Views Buttons and Knobs Page TON PTT PUSH-TOTalk but KeypadGROUP/CHANNEL Selection Page Display Messages SYS BusyCC Scan Txemer TX Data Sysc on Status Indicators Frcd PVTPage Page Universal Device Connector UDC Alert Tones Autokey Trunked Mode OnlyCall Queued Trunked Mode Only Call OriginateCarrier Control Timer System Busy Trunked Mode OnlyCall Denied Trunked Mode Only Low Battery WarningKey Press Alert Low Battery Alert Transmit LockoutOperation Keypad LOCK/UNLOCK Turning on the Radio U T H X X X X XY = Z Z Z S =L S Y S Menu N U K L G H T N U Y Y Y Y Y YK L = X X Page Feature Display Feature Encryption Display Serial Number ROM 12 Hex Digits Feature Encryption Data Stream Number FieldsFeatures Enabled ProsoundSYSTEM/GROUP/CHANNEL Selection Primary function for these controls System SelectionDisplay registers the new system name on line one Group And Channel Selection EMERGENCY/HOME Button Definition HomeAegis and Voice Guard Operation Voice ModesAegis Digital Mode Clear ModesDtmf Hardware DSP ERRAegis Private and Voice Guard Private Modes Transferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero Receiving An Encrypted Call Private OperationTransmitting An Encrypted Call Scanned Group Calls Page Edacs Trunked Mode Operation Receiving a CallSending a Call Conventional Failsoft Scat Operation Emergency OperationReceiving An Emergency Call Declaring An Emergency CallScanning Trunked Systems Wide Area System ScanPriority System Scan ProSoundMenu Selection Adding Groups To a Scan List Pre-Programmed Keypad KeyScanning Trunked Groups Deleting Groups From a Scan ListNuisance Delete Turning Scan OnTurning Scan Off Programmable Entries Individual Calls Is pressedPage Call Storage Lists Sending An Individual Call Trunked Mode Only Sending a Telephone Interconnect Call Trunked Mode Only Receiving a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Page Portable Data Data Displays Data Off Operation Data On OperationScan Lockout Mode Exiting Data CallsProFile Select Option Data Lockout ModeMenu Option Option Availability STATUS/MESSAGE Operation Status OperationMessage Operation Edacs Conventional P1 Scan Dynamic Regroup OperationEmergency Operation Macro KEY OperationConventional Mode Operation Squelch Adjust 256K & UP Version Radios onlyMenu Selection Receiving a Call Sending a Call Page Using 5-Tone Signalling For Emergency Declaration Tone Encode TransmissionScanning Conventional Channels Adding Channels to a Scan List Deleting Channels from a Scan List Nuisance DeleteTurning Scan on Turning Scan OFFType 99 Decode Conventional only 100 Operating Rules and Regulations 101Operating Tips 102Intrinsically Safe Usage Battery Packs103 Accessories 104Glossary 105106 Monitor and receive calls from these groups107 InterconnectPage 109 Warranty 110NICKEL-CADMIUM Battery Warranty 111Emergency Numbers

LBI-38732E specifications

The Ericsson LBI-38732E is a prominent piece of communication equipment that showcases advanced features and cutting-edge technologies intended for enhancing network performance and reliability. This model is part of Ericsson's extensive portfolio designed for telecommunications service providers and enterprises looking for robust and scalable solutions.

One of the main features of the LBI-38732E is its high-capacity processing capabilities. It is engineered to handle large volumes of data traffic, ensuring seamless connectivity even during peak usage times. The processing architecture is optimized for low latency, which is critical for applications requiring real-time responsiveness, such as voice over IP and video conferencing.

The LBI-38732E leverages multiple advanced technologies including Software-Defined Networking (SDN) and Network Functions Virtualization (NFV). These technologies allow operators to enhance their network flexibility and agility, facilitating easier management and deployment of new services. By using SDN, the LBI-38732E enables dynamic resource allocation, which can significantly improve operational efficiency.

In addition, the device supports multi-access edge computing (MEC), bringing processing capabilities closer to the end-user. This functionality reduces latency and enhances user experiences, particularly for applications such as augmented reality, IoT, and real-time analytics.

Another key characteristic of the LBI-38732E is its integration with Ericsson's broader ecosystem of network management tools. This integration ensures operators have access to advanced analytics and monitoring capabilities, enabling proactive maintenance and swift issue resolution. The platform also allows for seamless updates and upgrades, ensuring that the technology stays current with evolving market demands.

Furthermore, the LBI-38732E is designed with security as a fundamental aspect. It includes advanced encryption and authentication features to protect sensitive data and ensure the integrity of communications. These security measures are crucial, especially in an era where cyber threats are increasingly sophisticated.

Overall, the Ericsson LBI-38732E stands out as a versatile and powerful solution for modern telecommunications networks. Its innovative features, combined with robust security and management capabilities, make it a valuable asset for operators aiming to deliver high-quality services while adapting to the rapidly changing technological landscape.
Top Page Image Contents