Ericsson LBI-38732E manual Option Availability

Page 84

NOTE

ProFile Off terminates any ongoing conversation(s) with ProFile Manager. If this occurs ProFile Manager must restart communication with the radio from the beginning

-it does NOT restart where it was interrupted as DATA OFF does.

If the MDT cable is not attached when ProFile On is selected, DATA ON shows on the menu screen for two seconds; and the radio is now capable of receiving ProFile data - calls.

If the MDT cable is attached when ProFile On is selected, DATA ON will not be displayed.

Pressing the mbutton when the desired state is displayed chooses the new ProFile state. The display then returns to the system/group display. If a selection is not made before the display time-out time the current menu selection becomes the new selection. If a selec- tion is not made before the CLEAR button is pressed, the pre-menu state remains active.

Option Availability

If the ProFile Select Option is not in the menu list, mapped to a key, or part of a macro, the option will not be available. Also, if the radio is in one of the following modes, ProFile is not available:

∙Radio Disabled

∙Conventional Failsoft

84

Page 83 Page 85
Image 84
Page 83 Page 85
Contents LBI-38732E Operator’s Manual Page Table of Contents Edacs Trunked Mode Operation Scanning Conventional Channels Operating Rules and Regulations Safety Information Battery Charging and Care Page For Best Performance Extended Operations Transceiver Service FCC LicensingIntroduction User Interface RK II Portable Radio Top And Partial Left Panel Views Buttons and Knobs Page PUSH-TO Talk butTON PTT KeypadGROUP/CHANNEL Selection Page Display Messages SYS BusyCC Scan Txemer TX Data Sysc on Status Indicators Frcd PVTPage Page Universal Device Connector UDC Autokey Trunked Mode Only Call Queued Trunked Mode OnlyAlert Tones Call OriginateSystem Busy Trunked Mode Only Call Denied Trunked Mode OnlyCarrier Control Timer Low Battery WarningLow Battery Alert Transmit Lockout Key Press AlertOperation Keypad LOCK/UNLOCK Turning on the Radio X X X X X Y = Z Z ZU T H S =L S Y S Menu N U Y Y Y Y Y Y N U K L G H TK L = X X Page Feature Display Feature Encryption Display Serial Number ROM 12 Hex Digits Feature Encryption Data Stream Number FieldsFeatures Enabled ProsoundSYSTEM/GROUP/CHANNEL Selection Primary function for these controls System SelectionDisplay registers the new system name on line one Group And Channel Selection EMERGENCY/HOME Button Definition HomeAegis and Voice Guard Operation Voice ModesAegis Digital Mode Clear ModesDtmf DSP ERR HardwareAegis Private and Voice Guard Private Modes Transferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero Private Operation Receiving An Encrypted CallTransmitting An Encrypted Call Scanned Group Calls Page Edacs Trunked Mode Operation Receiving a CallSending a Call Conventional Failsoft Scat Operation Emergency OperationReceiving An Emergency Call Declaring An Emergency CallScanning Trunked Systems Wide Area System ScanProSound Priority System ScanMenu Selection Pre-Programmed Keypad Key Scanning Trunked GroupsAdding Groups To a Scan List Deleting Groups From a Scan ListNuisance Delete Turning Scan OnTurning Scan Off Programmable Entries Individual Calls Is pressedPage Call Storage Lists Sending An Individual Call Trunked Mode Only Receiving a Telephone Interconnect Call Trunked Mode Only Sending a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Page Portable Data Data Displays Data Off Operation Data On OperationScan Lockout Mode Exiting Data CallsData Lockout Mode ProFile Select OptionMenu Option Option Availability STATUS/MESSAGE Operation Status OperationMessage Operation Edacs Conventional P1 Scan Dynamic Regroup OperationEmergency Operation Macro KEY OperationConventional Mode Operation Squelch Adjust 256K & UP Version Radios onlyMenu Selection Receiving a Call Sending a Call Page Using 5-Tone Signalling For Emergency Declaration Tone Encode TransmissionScanning Conventional Channels Adding Channels to a Scan List Deleting Channels from a Scan List Nuisance DeleteTurning Scan on Turning Scan OFFType 99 Decode Conventional only 100 Operating Rules and Regulations 101Operating Tips 102Battery Packs Intrinsically Safe Usage103 Accessories 104Glossary 105106 Monitor and receive calls from these groups107 InterconnectPage 109 Warranty 110NICKEL-CADMIUM Battery Warranty 111Emergency Numbers

LBI-38732E specifications

The Ericsson LBI-38732E is a prominent piece of communication equipment that showcases advanced features and cutting-edge technologies intended for enhancing network performance and reliability. This model is part of Ericsson's extensive portfolio designed for telecommunications service providers and enterprises looking for robust and scalable solutions.

One of the main features of the LBI-38732E is its high-capacity processing capabilities. It is engineered to handle large volumes of data traffic, ensuring seamless connectivity even during peak usage times. The processing architecture is optimized for low latency, which is critical for applications requiring real-time responsiveness, such as voice over IP and video conferencing.

The LBI-38732E leverages multiple advanced technologies including Software-Defined Networking (SDN) and Network Functions Virtualization (NFV). These technologies allow operators to enhance their network flexibility and agility, facilitating easier management and deployment of new services. By using SDN, the LBI-38732E enables dynamic resource allocation, which can significantly improve operational efficiency.

In addition, the device supports multi-access edge computing (MEC), bringing processing capabilities closer to the end-user. This functionality reduces latency and enhances user experiences, particularly for applications such as augmented reality, IoT, and real-time analytics.

Another key characteristic of the LBI-38732E is its integration with Ericsson's broader ecosystem of network management tools. This integration ensures operators have access to advanced analytics and monitoring capabilities, enabling proactive maintenance and swift issue resolution. The platform also allows for seamless updates and upgrades, ensuring that the technology stays current with evolving market demands.

Furthermore, the LBI-38732E is designed with security as a fundamental aspect. It includes advanced encryption and authentication features to protect sensitive data and ensure the integrity of communications. These security measures are crucial, especially in an era where cyber threats are increasingly sophisticated.

Overall, the Ericsson LBI-38732E stands out as a versatile and powerful solution for modern telecommunications networks. Its innovative features, combined with robust security and management capabilities, make it a valuable asset for operators aiming to deliver high-quality services while adapting to the rapidly changing technological landscape.
Top Page Image Contents