Ericsson LBI-39110 manual Key, System Selection-Direct Number Entry, Group Selection-Ramping Names

Page 18

for the programmed display time-out period. If the

is released and then pressed again during this time the radio ramps to the next system name in the list.

If the radio is programmed for a split display then both the selected system and group are displayed when the radio is idling. The first time

the key is pressed the radio ramps to the next system name in the list.

The ramp direction through the system name list is selectable. It is toggled by pressing

the key.

System Selection-Direct Number Entry

Direct system selection can be made by entering (1) the system selection digit(s), (2)

pressing, (3) pressing . If an invalid number is entered, the first system is selected.

Group Selection-Ramping Names

The desired group is selected by pressing

and releasing . The ramp direction of the

group selection is changed by pressing and

then.

Group Selection-Direct Number Entry

Direct group selection can be made by entering (1) the group selection digit(s), (2)

pressing, (3) pressing. If an invalid group number is entered, the first group is selected.

Unlocking The Radio

After the portable is locked the user can unlock the portable by keying in the lock code. If an incorrect digit is entered simply start over with the correct code. If the lock code is forgotten, contact the system operator.

18

Image 18

Contents Operators Manual Table of Contents Table of Contents Important Safety Information List of possible hazards follows Safety InformationProduct has been exposed to rain or moisture or Explosive AtmospheresDynamite Blasting Caps Liquefied LP Gas Powered VehiclesOperating Procedures Radio Frequency EnergyPage Introduction Page Function Portion User Interface ButtonKeypad Momentarily PressRecalls numbers from memory locations Extended Features Volume UP ButtonVolume Down Button Numeric PortionDuplex operation Enables/disablesFor placing/storing Locks the radioPWR Status IndicatorsFCN Serv Edacs Applications Call Originate Alert Not used Indicates the radio’s keypad is locked Alert Tones Call QueuedCall Denied AutokeySystem Busy OUT of Range System InoperativeTurning The Radio ON/OFF Volume AdjustOperation General Edacs OperationGroup Selection-Ramping Names KeySystem Selection-Direct Number Entry Group Selection-Direct Number EntryInterconnect Dialing Locking The RadioProgrammable Flex Keys Redial KeyUsing Special Call Lists Individual Call NotificationStoring An Individual Call ID Simplex Operation Storing a Telephone Number To The Call ListRecalling calls from the call list System Key usageCall Timer CLR key Usage Last Digit Clear And Display ClearAlert Key Simplex Unit. To enable the external mic, pressEXT MIC Handsfree MuteSPC ScanScan ADD/DELETE PauseProgrammable Options Carrier Control Timer CCTOperator enters or . The length of pause is PC programmable Call Time-outsTX Disable-Group Option Automatic LoginSupervisory Mode Rx Disable-Group OptionLow Battery Alarm Cleaning InstructionsBattery Voltage Indicator Control Channel LimitsCare and Maintenance Inserting and Removing a BatteryStandard Battery Removal Insertion Optional High Capacity Battery Removal Slide IndicatorRecharging Using Rapid Multi-ChargerCharging a Battery Out of the Phone Plug the AC converter into an AC outletCharging Your Battery Charging While the Battery is in the PhoneLocate the end of the battery with round charging contacts Removing BatteryUsing the Rapid Travel Charger Using Smart Charging Accessories Restoring Battery CapacityAllow the radio to remain on until it turns itself off MAh Standard Battery Available OptionsOption Frequently Called Numbers Page Page Page Warranty Emergency Numbers