Ericsson LBI-39110 Automatic Login, Wide Area System Scan, Supervisory Mode, Priority System Scan

Page 26

Automatic Login

The Allegra Duplex Portable supports Automatic Login for EDACS trunked systems.

Wide Area System Scan

The Allegra Duplex Portable supports Wide Area Roaming. When scanning, there is a programmable time interval that determines when the radio starts scanning the next site.

Supervisory Mode

When a Allegra Duplex Portable is programmed as supervisory, it is capable of handling all normal supervisory functions.

Programmable Audio/Display

Each EDACS system has a programmable option to handle display and audio during emergency conditions. When an emergency occurs, the display option can be programmed to hold the display unchanged until the PTT button is pressed or the emergency is cleared. The audio option, similarly, causes the radio to remain muted until PTT is pressed or the emergency is cleared.

Priority System Scan

This option allows the Allegra Duplex Portable to search for a second operating system while locked onto the control channel of the selected system. If a second control channel is found, the radio switches to that system. The scan frequency is programmable.

Group Options

Each EDACS trunked system uses a set of groups. Each set allows for a home Group ID, Dynamic Regroup/encoding, and Emergency calls. In addition to each group ID the following options are supported.

TX Disable-Group Option

This option prevents keying a radio on a particular group (monitor only).

Rx Disable-Group Option

This option prevents unmuting a radio on a particular group.

26

Image 26
Contents Operators Manual Table of Contents Table of Contents Important Safety Information List of possible hazards follows Safety InformationProduct has been exposed to rain or moisture or Explosive AtmospheresDynamite Blasting Caps Liquefied LP Gas Powered VehiclesOperating Procedures Radio Frequency EnergyPage Introduction Page Function Portion User Interface ButtonKeypad Momentarily PressRecalls numbers from memory locations Extended Features Volume UP ButtonVolume Down Button Numeric PortionDuplex operation Enables/disablesFor placing/storing Locks the radioPWR Status IndicatorsFCN ServEdacs Applications Call Originate Alert Not used Indicates the radio’s keypad is lockedAlert Tones Call QueuedCall Denied AutokeySystem Busy OUT of Range System InoperativeTurning The Radio ON/OFF Volume AdjustOperation General Edacs OperationGroup Selection-Ramping Names KeySystem Selection-Direct Number Entry Group Selection-Direct Number EntryInterconnect Dialing Locking The RadioProgrammable Flex Keys Redial KeyStoring An Individual Call ID Using Special Call ListsIndividual Call Notification Simplex Operation Storing a Telephone Number To The Call ListRecalling calls from the call list System Key usageAlert Key Call TimerCLR key Usage Last Digit Clear And Display Clear Simplex Unit. To enable the external mic, press EXT MIC Handsfree MuteSPC ScanScan ADD/DELETE PauseProgrammable Options Carrier Control Timer CCTOperator enters or . The length of pause is PC programmable Call Time-outsTX Disable-Group Option Automatic LoginSupervisory Mode Rx Disable-Group OptionLow Battery Alarm Cleaning InstructionsBattery Voltage Indicator Control Channel LimitsStandard Battery Removal Insertion Care and MaintenanceInserting and Removing a Battery Optional High Capacity Battery Removal Slide IndicatorRecharging Using Rapid Multi-ChargerCharging a Battery Out of the Phone Plug the AC converter into an AC outletCharging Your Battery Charging While the Battery is in the PhoneUsing the Rapid Travel Charger Locate the end of the battery with round charging contactsRemoving Battery Allow the radio to remain on until it turns itself off Using Smart Charging AccessoriesRestoring Battery Capacity Option MAh Standard BatteryAvailable Options Frequently Called Numbers Page Page Page Warranty Emergency Numbers