Ericsson LBI-39110 manual Introduction

Page 8

for your station's particular type of operation for the proper procedure.

8.No changes or adjustments shall be made to the equipment except by an authorized or certified electronics technician.

INTRODUCTION

This manual describes how to use the Allegra Duplex Portable Radio. The Allegra Duplex is a synthesized, microprocessor-based, high performance duplex portable FM radio providing reliable two-way communications in Enhanced Digital Access Communications System (EDACS) trunking environments.

Duplex operation is provided in EDACS sys- tems while operating in the Telephone Interconnect Mode. At all other times, the radio

provides simplex communications, i.e. when placing group calls in the EDACS environments or when operating in the conventional mode.

In an EDACS trunked environment the user selects a communications system and group. In this mode, channel selection is transparent to the user and is controlled via digital communication with the system controller. This provides advanced programmable features and fast access to communication channels.

The exact operation of the radio depends on the operating mode, the radio's programming, and the particular radio system. Most features described in this manual may be enabled or disabled through programming. Consult the system administrator for the required features to be programmed into the radio.

8

Image 8
Contents Operators Manual Table of Contents Table of Contents Important Safety Information Safety Information Product has been exposed to rain or moisture or List of possible hazards follows Explosive AtmospheresLiquefied LP Gas Powered Vehicles Operating ProceduresDynamite Blasting Caps Radio Frequency EnergyPage Introduction Page User Interface Button KeypadFunction Portion Momentarily PressRecalls numbers from memory locations Volume UP Button Volume Down ButtonExtended Features Numeric PortionEnables/disables For placing/storingDuplex operation Locks the radioStatus Indicators FCNPWR ServNot used Indicates the radio’s keypad is locked Alert TonesEdacs Applications Call Originate Alert Call QueuedAutokey System BusyCall Denied OUT of Range System InoperativeVolume Adjust Operation GeneralTurning The Radio ON/OFF Edacs OperationKey System Selection-Direct Number EntryGroup Selection-Ramping Names Group Selection-Direct Number EntryLocking The Radio Programmable Flex KeysInterconnect Dialing Redial KeyStoring An Individual Call ID Using Special Call ListsIndividual Call Notification Storing a Telephone Number To The Call List Recalling calls from the call listSimplex Operation System Key usageAlert Key Call TimerCLR key Usage Last Digit Clear And Display Clear Unit. To enable the external mic, press EXT MIC HandsfreeSimplex MuteScan Scan ADD/DELETESPC PauseCarrier Control Timer CCT Operator enters or . The length of pause is PC programmableProgrammable Options Call Time-outsAutomatic Login Supervisory ModeTX Disable-Group Option Rx Disable-Group OptionCleaning Instructions Battery Voltage IndicatorLow Battery Alarm Control Channel LimitsStandard Battery Removal Insertion Care and MaintenanceInserting and Removing a Battery Optional High Capacity Battery Removal Slide IndicatorUsing Rapid Multi-Charger Charging a Battery Out of the PhoneRecharging Plug the AC converter into an AC outletCharging Your Battery Charging While the Battery is in the PhoneUsing the Rapid Travel Charger Locate the end of the battery with round charging contactsRemoving Battery Allow the radio to remain on until it turns itself off Using Smart Charging AccessoriesRestoring Battery Capacity Option MAh Standard BatteryAvailable Options Frequently Called Numbers Page Page Page Warranty Emergency Numbers