NorthStar Navigation 710 VHF installation manual Time Display Options Time Display

Page 16

2-5-3 Time Format Options (TIME FORMAT)

Time can be shown in 12 or 24 hour format.

GPS/DATA		SETTING
MANUAL		TIME OFFSET
> SETTING		> TIME FORMAT
		TIME DISPLAY

TIME FORMAT

>12 Hr

24 Hr 07:15AM LOC

1.Select GPS/DATA, then SETTING.

2.Select TIME FORMAT.

3.Select 12 Hr or 24 Hr as desired. In this example, 12 hour format has been selected and so the LCD shows the AM or PM suffix.

2-5-4 Time Display Options (TIME DISPLAY)

If you have entered the time manually as described in the previous sections, the time is always shown on the screen with the preﬁ x M.

However, if the vessel position is being updated through a GPS navigation receiver, you can switch the time display on the screen ON or OFF as follows:

GPS/DATA

TIME OFFSET

TIME FORMAT

> TIME DISPLY

TIME DISPLY

ON

> OFF

1.Select GPS/DATA, then SETTING.

2.Select TIME DISPLAY.

3.Select ON (on) or OFF (oﬀ ) as desired. In this example, OFF has been selected and so the screen no longer shows the time.

If the time display is set ON, course and speed data are not displayed on the LCD (see section 2-5-6).

2-5-5 Position Display Options (LL display)

If you have entered the vessel position manually as described in the previous section, the vessel position is always shown on the screen with the suﬃx M.

However, if the time is being updated through a GPS navigation receiver, you can switch the vessel position display on the screen on or oﬀ as follows:

GPS/DATA

TIME FORMAT

TIME DISPLY

> LL DISPLAY

LLDISPLAY ON

>OFF

1.Select GPS/DATA, then SETTING.

2.Select LL DISPLAY.

3.Select ON (on) or OFF (oﬀ ) as desired. In this example, OFF has been selected and the screen no longer shows the vessel position.

2-5-6 Course & Speed Display Options (COG/SOG)

Use this option to display course over ground (COG) and speed over ground (SOG) data on the screen.

GPS/DATA

TIME DISPLY

LL DISPLY

>COG/SOG

COG/SOG

>ON OFF

1.Select GPS/DATA, then SETTING.

2.Select COG/SOG.

3.Select ON (on) or OFF (oﬀ ) as desired. In this example, ON has been selected and so the screen shows the bearing and speed.

If GOG/SOG is set ON (on), the time is not displayed on the screen (see section 2-5-4).

16	Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual

Image 16

Contents Explorer 710 VHF Important Safety Information Contents RF Emissions Notice General Information FeaturesCustomizing your Northstar VHF Radio How to Enter Alphanumeric Data How to Display and Navigate MenusLCD Symbols and Meanings HI LO WX ALTBusy PRIVOL/PWR Basic Operation and Key FunctionsSQL 3CH UICDIM ScanENT ESCCALL/MENU MenuRadio Menu Options Menu Maintain Your Buddy List Buddy List Edit an EntryLocal or Distance Sensitivity LOCAL/DIST Set Distance SensitivitySet Local Sensitivity Backlighting Backlight and Contrast ContrastSet the Backlighting Level Set the Contrast LevelGPS Data and Time GPS/DATA Manually Enter Position and UTC Time ManualLocal Time Time Offset GPS/DATA Manual SettingTime Offset Position Display Options LL display Time Display Options Time DisplayCourse & Speed Display Options COG/SOG Reset to Factory Defaults Reset GPS Alert Options AlertGPS Simulator Simulator Select GPS SIM, then select on on or OFF oﬀ as desiredRadio Setup Menu Radio Setup Radio Setup Menu Radio SetupChannel Names CH Name Ring & Beep Volume Ring VOL and Beep VOL Set the Priority Channel Watch ModeSelect Radio SETUP, then INT Speaker Internal Speaker Connections INT SpeakerSelect Radio SETUP, then WX Alert Radio Setup INT Speaker Watch Mode WX Alert OFFWeather Alert Wx Alert Nmea protocol COM PortDSC Setup Menu DSC Setup DSC Setup Menu OptionsEnter Your User Mmsid User Mmsid MmsidMaintain Your Groups Group Setup Create a Group Group SetupSelect DSC SETUP, then Group Setup Edit Group Name DetailsDelete a Group Response to Individual Calls Indiv ReplyAtis Mmsid & Atis Functionality Enter or Edit Your Atis MmsidEnable Atis Functionality Atis Func DSC Setup Indiv Reply Atis Mmsid Atis Func On OFFDSC Setup Group Setup Indiv Reply DSC Func On OFF DSC functionality options DSC FuncIndiv Reply Auto DSC Setup LL ReplyDSC Func Manual LL Reply OFF Sending and Receiving DSC Calls Sending DSC callsRetrying a Routine Call Make a Routine Call IndividualAcknowledgement of an Individual Incoming Call Indiv Call a Group Group Call All Ships ALL ShipsCall using the Distress Log Dist LOG Call using the Call Log Call LOGSet the channel and continue as explained in Section Receiving DSC Calls Request the LL Position of a Buddy LL RequestReceiving an All Ships Call ALL Ships Receiving a Geographic Call Geograph Receiving a Group Call GroupReceiving a Polled Position Call Position Sending a Distress Call Distress CallsOpen the red cover labelled Distress Receiving a Distress Call Distress Distress Acknowledgement distress ack or RelayRCV Distress Flooding ESC Exit RCV DistressAppendix a Technical Specifications Northstar VHF 710 US.EUTransmitter ReceiverFrequency 156.025 163.275 MHz UV distant / 2.5 uV localAppendix B Troubleshooting Appendix C VHF Marine Channel Charts International EU-DSC onSpecial Notes on International Channel Useage Page USA Channel Chart Send Receive Traffic Type Ship Name TAG Noaa Weather Channel Noaa WX Canadian Weather Channel Canada WXCanada Channel Chart Canadian CGShip Ship PleasureWeather EU Inland Waterway Channels Country Specific Digital selective calling for distress162 156.85AIS Page Appendix D Mmsid and License Information Special ChannelsInstallation Section Checklist pictured over Checklist middle picture opposite Installation OptionsGimbal Installation Connecting the Radio Recessed Installation picture belowChanging the Viewing Angle Connect the Radio Cables Rear view of base unit Wiring DetailsCable Pinout Color User Mmsid 978.897.6600 800.628.4487978.897.7241 PO Box