Connect the Radio Cables - Rear view of base unit
2
3
4
1
1.VHF Antenna connection. (Antenna is not supplied.)
2.Combined power and speaker cable. The end of the power cable splits in two: BLACK. Earth. Connect to the
RED. Power. Connect to the (+) POSITIVE battery terminal. Check that a 10A fuse is installed on this power cable, close to the battery.
3.External speaker cable.
4.GPS connector cable.
Wiring Details
In case a cable is cut accidentally the pinouts are shown here for information only. Do not cut cables intentionally.
| Cable | Pinout | Color |
|
|
|
|
1 | VHF Antenna |
|
|
|
|
|
|
2 | Power | 1. 13.6V DC + | Red (thick cable) |
|
|
|
|
|
| 2. 13.6V DC - | Black (thick cable) |
3 | External speaker | 1. EXTERNAL SPK + | White (thin cable) |
|
|
|
|
|
| 2. EXTERNAL SPK - | Black (thin cable) |
|
|
|
|
4 | GPS connector (pins used) | 4. NMEA IN + | Yellow |
|
|
|
|
|
| 5. NMEA IN - | Green |
|
|
|
|
|
| 2. NMEA OUT + | Orange |
|
|
|
|
|
| 6. NMEA OUT - | Black |
|
|
|
|
Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual | 55 |