Section 4 - DSC Setup Menu (DSC SETUP)
These DSC facilities are available only on the 710US and 710EU and a valid user MMSID must be entered to access the DSC functions.
4-1 DSC Setup - Menu Options
The following options are available:
Enter your user MMSID. See section 4.2. (If you do not have a user MMSID, see Appendix D.)
Enter or change the name and/or details of a group.
See section 4.3.
Choose an automatic or manual response to calls (VHF 710US only). See section 4.4.
Enter or change your ATIS MMSID (VHF 710EU only).
See section 4.5.
Enable/disable the ATIS function (VHF 710EU only).
See section 4.5.
Turn the DSC operation ON/OFF (on/off ).
See section 4.6.
Select the type of response to an LL polling request.
See section 4.7.
Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save and change data.
4-2 Enter Your USER MMSID (USER MMSID)
This is a
DSC SETUP
>USER MMSID GROUP SETUP INDIV REPLY
INPUT USER MMSID
187654321
MMSID
>STORE CANCEL
USER MMSID
INPUT AGAIN
You can display and read your user MMSID at any time, but you get only one opportunity to enter your user
MMSID.
1.Select DSC SETUP, then USER MMSID.
2.If this is the first time that you are entering your user MMSID, a dashed line appears.
Enter your user MMSID along the dashed line. Press ENT to confirm each correct entry and to move to the next digit.
If you make an error, press - until < appears, then press ENT to backup and correct the entry.
3.Press ENT to store your user MMSID.
4.Enter your user MMSID again as a password check, then press ENT to permanently store the user MMSID and return to the menu.
You can view your stored user MMSID at anytime by selecting USER MMSID in the main menu.
Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual | 21 |