NorthStar Navigation 710 VHF installation manual Call using the Call Log Call LOG

Page 29

5-2-7 Call using the Call Log (CALL LOG)

DSC CALL

GROUP

ALL SHIPS

> CALL LOG

VHF710

INDIVIDUAL ROUTINE

> SEND?

11VHF710

INDIVIDUAL ROUTINE 10:45PM LOC

VHF710

>CALL BACK DELETE SAVE

VHF710

INDIVIDUAL

ROUTINE

> SET CHANNEL

The Call Log contains the contact details for the 20 most recent incoming calls, so that you call any of them again quickly.

1.Press CALL MENU to enter DSC mode, then select CALL LOG. Scroll down to the desired contact details.

The radio displays the contact details for the most recent incoming call as the ﬁrst entry (01) in the call log. In the example, the contact details for the 11th most recent call are displayed.

2.Press ENT to conﬁrm the call back, then set the working channel and press ENT to send the call. Continue as explained in Section 5-2-1.

3.To save this log entry in your Buddy list, select SAVE and press ENT. Then enter the Name. The logged MMSID is automatically displayed.

5-2-8 Call using the Distress Log (DIST LOG)

DSC CALL ALL SHIPS CALL LOG

> DIST LOG

VHF710

INDIVIDUAL

ROUTINE

> SET CHANNEL

02 10:03 UTC VHF710 (xxx) 82º50. N 27º45. W

VHF710

INDIVIDUAL ROUTINE

> SEND?

DISTRESS

RELAY

PIRACY

987654321

VHF710

>CALL BACK DELETE

Note: DISTRESS RELAY calls can be sent in some countries.

The Distress Log contains the Distress Log data for the 10 most recent relayed Distress Calls, so that you can call any of them quickly. LL position is received to 3 decimal places, if the sending radio is qualiﬁ ed. Always try to make voice contact on CH16 ﬁ rst, as follows:

1.Press CALL/MENU to enter DSC mode, then select DIST LOG.

2.The most recently received Distress Call Is the ﬁrst entry (01) in the Distress Log. Select the entry that you want to call and press ENT.

The details are displayed over two screens that alternate every 1.5 seconds; the ﬁ rst screen shows the location and name or MMSID of the vessel in Distress, the second screen shows the nature of the emer- gency (if speciﬁed) and the MMSID of the vessel that relayed the Distress Call.

3.Set the channel and continue as explained in Section 5-2-1.

Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual

29

Image 29

Contents Explorer 710 VHF Important Safety Information Contents RF Emissions Notice Customizing your Northstar VHF Radio FeaturesGeneral Information LCD Symbols and Meanings How to Display and Navigate MenusHow to Enter Alphanumeric Data WX ALT HI LOBusy PRISQL Basic Operation and Key FunctionsVOL/PWR UIC 3CHDIM ScanESC ENTCALL/MENU MenuRadio Menu Options Menu Edit an Entry Maintain Your Buddy List Buddy ListSet Distance Sensitivity Local or Distance Sensitivity LOCAL/DISTSet Local Sensitivity Backlighting Backlight and Contrast ContrastSet the Contrast Level Set the Backlighting LevelGPS Data and Time GPS/DATA Manually Enter Position and UTC Time ManualTime Offset GPS/DATA Manual SettingLocal Time Time Offset Course & Speed Display Options COG/SOG Time Display Options Time DisplayPosition Display Options LL display GPS Alert Options Alert Reset to Factory Defaults ResetGPS Simulator Simulator Select GPS SIM, then select on on or OFF oﬀ as desiredChannel Names CH Name Radio Setup Menu Radio SetupRadio Setup Menu Radio Setup Set the Priority Channel Watch Mode Ring & Beep Volume Ring VOL and Beep VOLSelect Radio SETUP, then INT Speaker Internal Speaker Connections INT SpeakerRadio Setup INT Speaker Watch Mode WX Alert OFF Select Radio SETUP, then WX AlertWeather Alert Wx Alert Nmea protocol COM PortDSC Setup Menu Options DSC Setup Menu DSC SetupEnter Your User Mmsid User Mmsid MmsidCreate a Group Group Setup Maintain Your Groups Group SetupSelect DSC SETUP, then Group Setup Edit Group Name DetailsResponse to Individual Calls Indiv Reply Delete a GroupAtis Mmsid & Atis Functionality Enter or Edit Your Atis MmsidDSC Setup Indiv Reply Atis Mmsid Atis Func On OFF Enable Atis Functionality Atis FuncDSC Setup Group Setup Indiv Reply DSC Func On OFF DSC functionality options DSC FuncDSC Func Manual LL Reply OFF DSC Setup LL ReplyIndiv Reply Auto Sending DSC calls Sending and Receiving DSC CallsAcknowledgement of an Individual Incoming Call Indiv Make a Routine Call IndividualRetrying a Routine Call Call All Ships ALL Ships Call a Group GroupSet the channel and continue as explained in Section Call using the Call Log Call LOGCall using the Distress Log Dist LOG Receiving an All Ships Call ALL Ships Request the LL Position of a Buddy LL RequestReceiving DSC Calls Receiving a Polled Position Call Position Receiving a Group Call GroupReceiving a Geographic Call Geograph Open the red cover labelled Distress Distress CallsSending a Distress Call Distress Acknowledgement distress ack or Relay Receiving a Distress Call DistressRCV Distress Flooding ESC Exit RCV DistressNorthstar VHF 710 US.EU Appendix a Technical SpecificationsReceiver TransmitterFrequency 156.025 163.275 MHz UV distant / 2.5 uV localAppendix B Troubleshooting International EU-DSC on Appendix C VHF Marine Channel ChartsSpecial Notes on International Channel Useage Page USA Channel Chart Send Receive Traffic Type Ship Name TAG Canadian Weather Channel Canada WX Noaa Weather Channel Noaa WXCanadian CG Canada Channel ChartPleasure Ship ShipWeather Digital selective calling for distress EU Inland Waterway Channels Country SpecificAIS 156.85162 Page Special Channels Appendix D Mmsid and License InformationInstallation Section Checklist pictured over Installation Options Checklist middle picture oppositeGimbal Installation Changing the Viewing Angle Recessed Installation picture belowConnecting the Radio Cable Pinout Color Wiring DetailsConnect the Radio Cables Rear view of base unit User Mmsid 800.628.4487 978.897.6600978.897.7241 PO Box