NorthStar Navigation 710 VHF installation manual Gimbal Installation

Page 53

Gimbal Installation

1.Hold the mounting gimbal at the chosen location and use a soft pencil to mark the screw hole positions onto the mounting surface.

2.If you cannot reach behind the mounting surface to attach the nuts, use the 5mm self-tapping screws instead of the ﬂat screws shown in the picture. If you are drilling into ﬁberglass, use a drill bit smaller than 5mm to drill the pilot holes.

Otherwise, drill the four screw holes where marked, using a 5mm (3/16”) drill bit. Drill completely through the mounting surface.

3.Use a Philips screwdriver and the set of four ﬂat screws, spring washers, plain washers, and nuts to attach the mounting gimbal to the location site.

4.Slide the radio into the mounting gimbal.

5.Insert the two mounting knobs through the holes and tighten them suﬃciently to hold the radio at the desired viewing angle.

Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual

Image 53

Contents Explorer 710 VHF Important Safety Information Contents RF Emissions Notice Customizing your Northstar VHF Radio FeaturesGeneral Information LCD Symbols and Meanings How to Display and Navigate MenusHow to Enter Alphanumeric Data WX ALT HI LOBusy PRISQL Basic Operation and Key FunctionsVOL/PWR UIC 3CHDIM ScanESC ENTCALL/MENU MenuRadio Menu Options Menu Edit an Entry Maintain Your Buddy List Buddy ListSet Distance Sensitivity Local or Distance Sensitivity LOCAL/DISTSet Local Sensitivity Backlighting Backlight and Contrast ContrastSet the Contrast Level Set the Backlighting LevelGPS Data and Time GPS/DATA Manually Enter Position and UTC Time ManualTime Offset GPS/DATA Manual SettingLocal Time Time Offset Course & Speed Display Options COG/SOG Time Display Options Time DisplayPosition Display Options LL display GPS Alert Options Alert Reset to Factory Defaults ResetGPS Simulator Simulator Select GPS SIM, then select on on or OFF oﬀ as desiredChannel Names CH Name Radio Setup Menu Radio SetupRadio Setup Menu Radio Setup Set the Priority Channel Watch Mode Ring & Beep Volume Ring VOL and Beep VOLSelect Radio SETUP, then INT Speaker Internal Speaker Connections INT SpeakerRadio Setup INT Speaker Watch Mode WX Alert OFF Select Radio SETUP, then WX AlertWeather Alert Wx Alert Nmea protocol COM PortDSC Setup Menu Options DSC Setup Menu DSC SetupEnter Your User Mmsid User Mmsid MmsidCreate a Group Group Setup Maintain Your Groups Group SetupSelect DSC SETUP, then Group Setup Edit Group Name DetailsResponse to Individual Calls Indiv Reply Delete a GroupAtis Mmsid & Atis Functionality Enter or Edit Your Atis MmsidDSC Setup Indiv Reply Atis Mmsid Atis Func On OFF Enable Atis Functionality Atis FuncDSC Setup Group Setup Indiv Reply DSC Func On OFF DSC functionality options DSC FuncDSC Func Manual LL Reply OFF DSC Setup LL ReplyIndiv Reply Auto Sending DSC calls Sending and Receiving DSC CallsAcknowledgement of an Individual Incoming Call Indiv Make a Routine Call IndividualRetrying a Routine Call Call All Ships ALL Ships Call a Group GroupSet the channel and continue as explained in Section Call using the Call Log Call LOGCall using the Distress Log Dist LOG Receiving an All Ships Call ALL Ships Request the LL Position of a Buddy LL RequestReceiving DSC Calls Receiving a Polled Position Call Position Receiving a Group Call GroupReceiving a Geographic Call Geograph Open the red cover labelled Distress Distress CallsSending a Distress Call Distress Acknowledgement distress ack or Relay Receiving a Distress Call DistressRCV Distress Flooding ESC Exit RCV DistressNorthstar VHF 710 US.EU Appendix a Technical SpecificationsReceiver TransmitterFrequency 156.025 163.275 MHz UV distant / 2.5 uV localAppendix B Troubleshooting International EU-DSC on Appendix C VHF Marine Channel ChartsSpecial Notes on International Channel Useage Page USA Channel Chart Send Receive Traffic Type Ship Name TAG Canadian Weather Channel Canada WX Noaa Weather Channel Noaa WXCanadian CG Canada Channel ChartPleasure Ship ShipWeather Digital selective calling for distress EU Inland Waterway Channels Country SpecificAIS 156.85162 Page Special Channels Appendix D Mmsid and License InformationInstallation Section Checklist pictured over Installation Options Checklist middle picture oppositeGimbal Installation Changing the Viewing Angle Recessed Installation picture belowConnecting the Radio Cable Pinout Color Wiring DetailsConnect the Radio Cables Rear view of base unit User Mmsid 800.628.4487 978.897.6600978.897.7241 PO Box