NorthStar Navigation 710 VHF Radio Setup Menu Radio Setup, Channel Names CH Name

Section 3 - Radio Setup Menu (RADIO SETUP)

3-1 Radio Setup Menu (RADIO SETUP)

CH NAME	Edit or delete channel names.
	See Section 3-2.
RING VOLUME	Set the volume level of the incoming call notification beeps.
	See section 3-3.
BEEP VOLUME	Set the volume level of the beeps.
	See section 3-3.
INT SPEAKER	Switch ON/OFF (on/off ) the radio’s internal speakers.
	See section 3-4.
WATCH MODE	Selects the operation of Dual or Tri watch scanning.
	See section 3-5.
WX ALERT	(Selects if the WX Alert scanning mode is ON (on) or OFF (off ). (VHF 710US only.)
	See section 3-6.
	Select NMEA protocol for communications between the VHF radio and any other
COM PORT	instruments.
	See section 3-7.

Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data.

3-2 Channel Names (CH NAME)

The channel charts are listed in Appendix C with their default name tags. CH NAME gives you the option to edit or delete the channel name tags displayed on the screen.

RADIO SETUP

>CH NAME RING VOLUME BEEP VOLUME

EDIT CH NAME TELEPHONE

CH NAME 01

TELEPHONE

SAVE CH NAME PHONE1

>YES NO

TELEPHONE

>EDIT DELETE

1.Select RADIO SETUP, then CH NAME.

2.Use + or - to step through the channels with their name tags until you see the channel name tag you want to change, then press ENT. In this example, the channel name TELEPHONE associated with channel 01 is being changed to PHONE1.

3.Select EDIT and press ENT to edit the existing name tag. Input the new name over the existing name. It can be a maximum of 12 characters.

To delete the channel name, select DELETE and press ENT.

4.Press ENT (repeatedly if necessary) to display the YES/NO confirmation.

5.Press ENT to confirm the new channel name tag or the deletion, then press ESC to return to the menu.

18 Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual