Checklist (pictured over)
The following items should be supplied in the box. Check before starting the installation and contact your dealer if an item is missing. Note that an antenna is not provided with the VHF Radio. Consult your Northstar dealer for advice if necessary.
1.Mounting gimbal for the VHF radio
2.Power supply cable and external speaker connection cable
3.Two mounting knobs
4.Microphone bulkhead mount
5.GPS connection cable
6.Four
7.Four flat screws for the mounting gimbal
8.Four plain washers for the mounting gimbal
9.Four spring washers for the mounting gimbal
10.Four nuts for the mounting gimbal
11.Two
12.Two flat screws for the microphone bulkhead mount
13.Two plain washers for the microphone bulkhead mount
14.Two spring washers for the microphone bulkhead mount
15.Two nuts for the microphone bulkhead mount.
Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual | 51 |