NorthStar Navigation 710 VHF installation manual Basic Operation and Key Functions, Vol/Pwr, Sql

Page 8

1-6 Basic Operation and Key Functions

All possible keys and their functions are listed. Note that some of the keys are not available depending on your Northstar VHF radio model.

Key	Function
VOL/PWR	Volume and Power. Turn clockwise to power on. Continue to turn until a comfortable
	volume is reached. VOL/PWR will also adjust the settings of an external speaker, if
	connected.
SQL	Squelch or Threshold Level. Sets the threshold level for the minimum receiver
	signal. Turn fully counterclockwise until random noise is heard, then turn slowly
	clockwise until the random noise disappears. Make another 1/4 turn clockwise for
	best reception in open sea conditions.
	In areas of high noise (eg close to large cities) reception may improve if sensitivity
	is reduced. Either turn SQL slowly clockwise or use the LOCAL setting. See section
	2.3.
16/9	Priority Channel. VHF 710US only. Also on the microphone. Press to cancel all other
	modes and to tune into the priority channel. Press again to return to your original
	channel.
	The default is Channel 16. To make Channel 09 the priority channel, hold down 16/9
	until a beep sounds and 09 is displayed.
16	Priority Channel. VHF 710EU. Also on the microphone. Press to cancel all other
	modes and to tune into the priority channel, Channel 16, on high power. Press
	again to return to your original channel.
WX	Weather Channel. VHF 710US. In USA and Canadian waters, press to hear the most
	recently selected weather station. The WX symbol is displayed on the LCD.
	Press + or - to change to a diﬀerent weather channel. Press WX again to return to
	the most recent channel.
	If the weather alert mode (ALT) is ON and an alert tone of 1050Hz is broadcast from
	the weather station, it is picked up automatically and the alarm sounds. Press any
	key to hear the weather alert voice message.

8Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual

Image 8

Contents Explorer 710 VHF Important Safety Information Contents RF Emissions Notice Customizing your Northstar VHF Radio FeaturesGeneral Information LCD Symbols and Meanings How to Display and Navigate MenusHow to Enter Alphanumeric Data HI LO WX ALTBusy PRISQL Basic Operation and Key FunctionsVOL/PWR 3CH UICDIM ScanENT ESCCALL/MENU MenuRadio Menu Options Menu Maintain Your Buddy List Buddy List Edit an EntryLocal or Distance Sensitivity LOCAL/DIST Set Distance SensitivitySet Local Sensitivity Backlighting Backlight and Contrast ContrastSet the Backlighting Level Set the Contrast LevelGPS Data and Time GPS/DATA Manually Enter Position and UTC Time ManualTime Offset GPS/DATA Manual SettingLocal Time Time Offset Course & Speed Display Options COG/SOG Time Display Options Time DisplayPosition Display Options LL display Reset to Factory Defaults Reset GPS Alert Options AlertGPS Simulator Simulator Select GPS SIM, then select on on or OFF oﬀ as desiredChannel Names CH Name Radio Setup Menu Radio SetupRadio Setup Menu Radio Setup Ring & Beep Volume Ring VOL and Beep VOL Set the Priority Channel Watch ModeSelect Radio SETUP, then INT Speaker Internal Speaker Connections INT SpeakerSelect Radio SETUP, then WX Alert Radio Setup INT Speaker Watch Mode WX Alert OFFWeather Alert Wx Alert Nmea protocol COM PortDSC Setup Menu DSC Setup DSC Setup Menu OptionsEnter Your User Mmsid User Mmsid MmsidMaintain Your Groups Group Setup Create a Group Group SetupSelect DSC SETUP, then Group Setup Edit Group Name DetailsDelete a Group Response to Individual Calls Indiv ReplyAtis Mmsid & Atis Functionality Enter or Edit Your Atis MmsidEnable Atis Functionality Atis Func DSC Setup Indiv Reply Atis Mmsid Atis Func On OFFDSC Setup Group Setup Indiv Reply DSC Func On OFF DSC functionality options DSC FuncDSC Func Manual LL Reply OFF DSC Setup LL ReplyIndiv Reply Auto Sending and Receiving DSC Calls Sending DSC callsAcknowledgement of an Individual Incoming Call Indiv Make a Routine Call IndividualRetrying a Routine Call Call a Group Group Call All Ships ALL ShipsSet the channel and continue as explained in Section Call using the Call Log Call LOGCall using the Distress Log Dist LOG Receiving an All Ships Call ALL Ships Request the LL Position of a Buddy LL RequestReceiving DSC Calls Receiving a Polled Position Call Position Receiving a Group Call GroupReceiving a Geographic Call Geograph Open the red cover labelled Distress Distress CallsSending a Distress Call Receiving a Distress Call Distress Distress Acknowledgement distress ack or RelayRCV Distress Flooding ESC Exit RCV DistressAppendix a Technical Specifications Northstar VHF 710 US.EUTransmitter ReceiverFrequency 156.025 163.275 MHz UV distant / 2.5 uV localAppendix B Troubleshooting Appendix C VHF Marine Channel Charts International EU-DSC onSpecial Notes on International Channel Useage Page USA Channel Chart Send Receive Traffic Type Ship Name TAG Noaa Weather Channel Noaa WX Canadian Weather Channel Canada WXCanada Channel Chart Canadian CGShip Ship PleasureWeather EU Inland Waterway Channels Country Specific Digital selective calling for distressAIS 156.85162 Page Appendix D Mmsid and License Information Special ChannelsInstallation Section Checklist pictured over Checklist middle picture opposite Installation OptionsGimbal Installation Changing the Viewing Angle Recessed Installation picture belowConnecting the Radio Cable Pinout Color Wiring DetailsConnect the Radio Cables Rear view of base unit User Mmsid 978.897.6600 800.628.4487978.897.7241 PO Box