Uniden UH015sx manual Lead-in Tone

Page 31

UNIDEN Model uh015sx UHF CB Radio

Selcall ID

3.When finished, press MENU /ENTER to store. Three successive beeps are heard.

4.Press MENU /ENTER for 2 seconds to exit. The radio returns to normal operation.

-or-

Turn the Channel Selector to go to the next programmable parameter.

Lead-in Tone

The Lead-in Tone, when programmed, ‘rides’ on the Lead-in Delay.

Hence, when transmitting a Selcall ID, a continuous tone will be heard for the duration of the Lead-in Delay.

The main purpose of the Lead-in Tone is to increase the probability of contact between your unit and another radio when TSQ Scanning.

1.Press and hold MENU then turn power on.

Rotate the Channel Selector until is displayed.

Tone _ 1 is the factory default setting of the uh015sx for Lead-in Tone.

2. Press MENU /ENTER and Lead-in Tone Editing is possible.

Use the Channel Selector to change the Lead-in Tone value.

30

Image 31

Contents Uniden Model uh015sx UHF CB Radio Contents Contents Preventative Maintenance FeaturesTroubleshooting Controls and Connectors Controls/ConnectorsIndicators IndicatorsPackage Contents Mounting the complete radio Transceiver with Display Unit Mounting OptionsFixing the Display Rear Bracket Remote mounting of the Display UnitMonitor Setting the SquelchOperation Selecting a Channel/POLICE and CB Channel GroupsTransmitting Using Repeater Channels Duplex ModeOperating the uh015sx in Duplex Mode Open Scan OS ModeScanning Group Scan GS Mode Press and hold Wide Band SearchingManual Programming RX ChannelsCopying a Police frequency to a RX Channel Menu /ENTER Copying a frequency found using Search to a RX ChannelProgramming the Instant Priority Channel VOX Operation optional VOX headset requiredRecalling the Instant Channel DCS Digitally Coded Squelch Ctcss Continuous Tone Coded Squelch SystemOutline Selective CallingReceiver Quieting To Activate Call ReceivingTone Calling Tone Squelch ScanningTX Tone Selcall Programming TX Selcall ID Format Group CallingTone Selcall Programming Programming Your Selcall ID Reciever Selcall IDSelecting 5 or 6 Tone Format From 5 to 6 Tone Format From 6 to 5 Tone Format settingOther Selcall Parameters Tone Period Selcall IDLead-in Delay Lead-in Delay Programming Lead-in Tone If you want to remove the Lead-in Tone choose the space Bar Alarm Mode Alarm ModeCall Alarm Continue Mode Alarm Mode Group Call Mode Selcall Tone Frequency List Default SettingsPlease follow these guidelines for channel use in Australia UHF CB Channels & FrequenciesCtcss & DCS Code List Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited