Uniden UH015sx manual Reciever Selcall ID, Programming Your Selcall ID

Page 25

UNIDEN Model uh015sx UHF CB Radio

Reciever Selcall ID

Programming Your Selcall ID.

To programme your own receiver Selcall ID.

1.Press and hold MENU then turn power on.

2.The initial display and status will appear on the screen (factory default is 00000).

3.When the MENU key is pressed while in this condition , the last digit will begin to flash.

4. Use

SCAN or POL

to select the digit position. The selected digit will flash.

5.Rotate the Channel Selector to change the active digit value.

6.When finished, press MENU /ENTER to store . Three successive beeps are heard.

7.Press MENU /ENTER for 2 seconds to exit. The radio returns to normal operation.

-or-

Turn the Channel Selector to go to the next programmable parameter.

24

Image 25

Contents Uniden Model uh015sx UHF CB Radio Contents Contents Preventative Maintenance FeaturesTroubleshooting Controls and Connectors Controls/ConnectorsIndicators IndicatorsPackage Contents Mounting the complete radio Transceiver with Display Unit Mounting OptionsFixing the Display Rear Bracket Remote mounting of the Display UnitOperation Setting the SquelchSelecting a Channel/POLICE and CB Channel Groups MonitorTransmitting Using Repeater Channels Duplex ModeOperating the uh015sx in Duplex Mode Open Scan OS ModeScanning Group Scan GS Mode Press and hold Wide Band SearchingManual Programming RX ChannelsCopying a Police frequency to a RX Channel Menu /ENTER Copying a frequency found using Search to a RX ChannelProgramming the Instant Priority Channel VOX Operation optional VOX headset requiredRecalling the Instant Channel DCS Digitally Coded Squelch Ctcss Continuous Tone Coded Squelch SystemOutline Selective CallingReceiver Quieting To Activate Call ReceivingTone Calling Tone Squelch ScanningTX Tone Selcall Programming TX Selcall ID Format Group CallingTone Selcall Programming Programming Your Selcall ID Reciever Selcall IDSelecting 5 or 6 Tone Format From 5 to 6 Tone Format From 6 to 5 Tone Format settingOther Selcall Parameters Tone Period Selcall IDLead-in Delay Lead-in Delay Programming Lead-in Tone If you want to remove the Lead-in Tone choose the space Bar Alarm Mode Alarm ModeCall Alarm Continue Mode Alarm Mode Group Call Mode Selcall Tone Frequency List Default SettingsPlease follow these guidelines for channel use in Australia UHF CB Channels & FrequenciesCtcss & DCS Code List Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited