Uniden UH015sx manual Lead-in Delay

Page 29

UNIDEN Model uh015sx UHF CB Radio

Selcall ID

4.When finished, press MENU /ENTER to store. Three successive beeps are heard.

5.Press MENU /ENTER for 2 seconds to exit. The radio returns to normal operation.

-or-

Turn the channel selector to go to the next programmable parameter.

Lead-in Delay

Lead-in delay is a Selcall transmission parameter that ‘wakes-up’ and helps the receiver of the other radio to lock onto the incoming signal. Each time a Selcall ID is transmitted, the Lead-in Delay attaches itself to the beginning of the code sequence and causes the transmitter to be on for a longer period prior to the code transmission. This makes for a stronger communication link between the transmitter and the other receiver.

One major advantage to having the longer Lead-in Delay is when selectively calling another radio via a repeater station. A longer Lead-in Delay helps to stabilise both the communication link from your radio to the repeater station and from the repeater station to the other radio.

28

Image 29
Contents Uniden Model uh015sx UHF CB Radio Contents Contents Troubleshooting FeaturesPreventative Maintenance Controls and Connectors Controls/ConnectorsIndicators IndicatorsPackage Contents Mounting the complete radio Transceiver with Display Unit Mounting OptionsFixing the Display Rear Bracket Remote mounting of the Display UnitOperation Setting the SquelchSelecting a Channel/POLICE and CB Channel Groups MonitorTransmitting Using Repeater Channels Duplex ModeScanning Open Scan OS ModeOperating the uh015sx in Duplex Mode Group Scan GS Mode Press and hold Wide Band SearchingCopying a Police frequency to a RX Channel RX ChannelsManual Programming Menu /ENTER Copying a frequency found using Search to a RX ChannelRecalling the Instant Channel VOX Operation optional VOX headset requiredProgramming the Instant Priority Channel DCS Digitally Coded Squelch Ctcss Continuous Tone Coded Squelch SystemReceiver Quieting Selective CallingOutline To Activate Call ReceivingTone Calling Tone Squelch ScanningTX Tone Selcall Programming TX Selcall ID Format Group CallingTone Selcall Programming Programming Your Selcall ID Reciever Selcall IDSelecting 5 or 6 Tone Format From 5 to 6 Tone Format From 6 to 5 Tone Format settingOther Selcall Parameters Tone Period Selcall IDLead-in Delay Lead-in Delay Programming Lead-in Tone If you want to remove the Lead-in Tone choose the space Bar Call Alarm Continue Mode Alarm ModeAlarm Mode Alarm Mode Group Call Mode Selcall Tone Frequency List Default SettingsPlease follow these guidelines for channel use in Australia UHF CB Channels & FrequenciesCtcss & DCS Code List Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited