Uniden UH015sx manual Remote mounting of the Display Unit, Fixing the Display Rear Bracket

Page 9

UNIDEN Model uh015sx UHF CB Radio

Mounting Options

Remote mounting of the Display Unit

Fixing the Display Rear

Bracket

To mount the Display Unit it needs to be fitted with a Display Rear Bracket (included in package).

a)Position the Display Rear Bracket so that one end fits over the two studs at the end of the Display Unit.

b)Push it into place until the fixing screw hole is aligned with its threaded counterpart.

c)Secure the Display Rear Bracket with the screw provided.

Optional mounting positions The Display Unit can be mounted from the top, back or bottom. d) Fix the Display Mount Bracket in place (above, at the rear or at the bottom) by screwing through the

slots in the bracket.

e) Fix the Display Unit to the bracket with the

Top fix

thumb screws provided.

Back fix

f)Connect the Extension Cable between the Display Unit and the Transceiver.

Bottom fix

8

Image 9
Contents Uniden Model uh015sx UHF CB Radio Contents Contents Features Preventative MaintenanceTroubleshooting Controls and Connectors Controls/ConnectorsIndicators IndicatorsPackage Contents Mounting the complete radio Transceiver with Display Unit Mounting OptionsFixing the Display Rear Bracket Remote mounting of the Display UnitOperation Setting the SquelchSelecting a Channel/POLICE and CB Channel Groups MonitorTransmitting Using Repeater Channels Duplex ModeOpen Scan OS Mode Operating the uh015sx in Duplex ModeScanning Group Scan GS Mode Press and hold Wide Band SearchingRX Channels Manual ProgrammingCopying a Police frequency to a RX Channel Menu /ENTER Copying a frequency found using Search to a RX ChannelVOX Operation optional VOX headset required Programming the Instant Priority ChannelRecalling the Instant Channel DCS Digitally Coded Squelch Ctcss Continuous Tone Coded Squelch SystemSelective Calling OutlineReceiver Quieting To Activate Call ReceivingTone Calling Tone Squelch ScanningTX Tone Selcall Programming TX Selcall ID Format Group CallingTone Selcall Programming Programming Your Selcall ID Reciever Selcall IDSelecting 5 or 6 Tone Format From 5 to 6 Tone Format From 6 to 5 Tone Format settingOther Selcall Parameters Tone Period Selcall IDLead-in Delay Lead-in Delay Programming Lead-in Tone If you want to remove the Lead-in Tone choose the space Bar Alarm Mode Alarm ModeCall Alarm Continue Mode Alarm Mode Group Call Mode Selcall Tone Frequency List Default SettingsPlease follow these guidelines for channel use in Australia UHF CB Channels & FrequenciesCtcss & DCS Code List Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited