Roland VC-2 31 Enh→Cho/Flg, Enhancer→Chorus/Flanger, Vocal Multi, 32 Enh→Delay Enhancer→Delay

Effects List

31: Enh→Cho/Flg
			Parameter	Value	Description
(Enhancer→Chorus/Flanger)
			Delay Feed-	-98– +98%	Adjusts the proportion of the delay
This effect connects Enhancer and either Chorus or Flanger in			back		sound that is fed back into the ef-
					fect. Negative (-) settings will in-
series.					vert the phase.
			Low Damp	50–4000 Hz	Adjusts the frequency below which
Parameter	Value	Description
			Freq		sound fed back to the effect will be
Enhan Sens	0–127	Sensitivity of the enhancer			cut.
Enhan Fre-	0–127	Sets the lower limit of the frequen-			The Low Damp function damps the
quency		cies to which the enhancement ef-			low frequency band of the delay
		fect is added.			sound quicker than other bands,
					which makes for a clearer delay ef-
Enhan Mix	0–127	Level of the overtones generated by
					fect.
Level		the enhancer
			Low Damp	-36–0 dB	Degree of Low Damp
Enhan Level	0–127	Volume of the enhancer sound
			Gain
Mod Mode	CHORUS,	Selects whether to use chorus or
			Hi Damp	2000–20000 Hz	Adjusts the frequency above which
	FLANGER	flanger.
			Freq		sound fed back to the effect will be
Mod Rate	0.05–10.0 Hz,	Adjusts the speed of modulation
					cut.
	note	for the chorus or flanger.			High Damp, by attenuating the
Mod Depth	0–127	Adjusts the depth of modulation			higher frequencies first, makes the
		for the chorus or flanger.			delay sound more natural.
			Hi Damp	-36–0 dB	Degree of High Damp
Mod Phase	0–180 deg	Sets how the chorus or flanger
		sound is spread.	Gain
			Delay Level	0–127	Volume of the delay sound.
Mod Pre De-	0–50.0 ms	Adjusts the delay time from the di-
lay		rect sound until the chorus or	Ps Low Freq	50–4000 Hz	Frequency of the low range
		flanger sound is heard.
			Ps Low Gain	-15– +15 dB	Gain of the low range
Mod Feed-	-98– +98 %	Adjusts the proportion of the effect
			Ps Hi Freq	2000–20000 Hz	Frequency of the high range
back		sound that is fed back into the ef-
			Ps Hi Gain	-15– +15 dB	Gain of the high range
		fect. Negative (-) settings will in-
		vert the phase.
Xover Low-	50–4000 Hz	Attenuates the effect in the range	33: Vocal Multi
Freq		below the specified frequency.
Xover Low	-36–0 dB	Specifies how greatly the low range	A limiter/de-esser, enhancer, 3-band equalizer, and delay are
Gain		will be attenuated.	connected in series.
Xover Hi-	2000–20000 Hz	Attenuates the effect in the range
			A limiter holds down high signal levels to prevent distortion.
Freq		above the specified frequency.
			A de-esser cuts the sibilant sounds of a voice, producing a
Xover Hi	-36–0 dB	Specifies how greatly the high
			gentler tone.
Gain		range will be attenuated.
Mod Level	0–127	Volume of the chorus or flanger
			Parameter	Value	Description
		sound.
			Limtr Mode	LIMITER,	Selects whether the effect will
Ps Low Freq	50–4000 Hz	Frequency of the low range
				DE-ESSER	function as a limiter or as a de-ess-
Ps Low Gain	-15– +15 dB	Gain of the low range			er.
					* If the Limtr Mode is DE-ESSER,
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
					the limiter settings are ignored.
Ps Hi Gain	-15– +15 dB	Gain of the high range
					Conversely, if the Limtr Mode is
					LIMITER, the de-esser settings are
32: Enh→Delay (Enhancer→Delay)					ignored.
			Limtr	-60–0 dB	Adjusts the level (Threshold Lev-
This effect connects an Enhancer and a Delay in series.			Threshold		el) at which the limiter will begin
					to operate.
Parameter	Value	Description	Limtr Re-	0–127	Adjusts the time until when the
			lease		limiter will turn off after the input
Enhan Sens	0–127	Sensitivity of the enhancer
					level falls below the threshold lev-
Enhan Fre-	0–127	Sets the lower limit of the frequen-
					el.
quency		cies to which the enhancement ef-
			Limtr Gain	-60– +12 dB	Adjusts the gain of the sound that
		fect is added.
					passes through the limiter.
Enhan Mix	0–127	Level of the overtones generated by
			DE Sens	0–127	Adjusts the sensitivity relative to
Level		the enhancer
					the input volume, which controls
Enhan Level	0–127	Volume of the enhancer sound
					how the effect is applied.
Delay Time	0–1300 ms,	Adjusts the delay time from the di-
			DE Frequen-	1000–10000 Hz	Adjusts the frequency at which the
	note	rect sound until the delay sound is
			cy		de-esser effect will apply.
		heard.

56