Effects List
Type | Cabinet | Speaker | Microphone |
|
|
|
|
MIDDLE | open back enclosure | 12 x 1 | dynamic |
open back enclosure | 12 x 2 | dynamic | |
BUILT IN 1 | open back enclosure | 12 x 2 | dynamic |
BUILT IN 2 | open back enclosure | 12 x 2 | condenser |
BUILT IN 3 | open back enclosure | 12 x 2 | condenser |
BUILT IN 4 | open back enclosure | 12 x 2 | condenser |
BUILT IN 5 | open back enclosure | 12 x 2 | condenser |
BG STACK 1 | sealed enclosure | 12 x 2 | condenser |
BG STACK 2 | large sealed enclosure | 12 x 2 | condenser |
MS STACK 1 | large sealed enclosure | 12 x 4 | condenser |
MS STACK 2 | large sealed enclosure | 12 x 4 | condenser |
METAL | large double stack | 12 x 4 | condenser |
STACK |
|
|
|
Recommended combination of pre-amp and speaker
Amp type | Speaker type |
|
|
BG LEAD | BG STACK |
MS1959 II | BG STACK |
MS1959 I+II | BG STACK |
SLDN LEAD | BG STACK |
METAL 5150 | BG STACK |
METAL LEAD | BG STACK |
BUILT IN | |
DISTORTION | BUILT IN |
FUZZ | BUILT IN |
07: Auto Wah
Wah is an effect that modifies the frequency characteristics of a filter over time, producing a unique tone. The wah effect can change in relation to the volume of the input signal, and/or cyclically.
Parameter | Value | Description |
|
|
|
Filter Type | LPF, BPF | Type of filter |
|
| LPF: The wah effect will be applied |
|
| over a wide frequency range. |
|
| BPF: The wah effect will be applied |
|
| over a narrow frequency range |
Polarity | DOWN, UP | When using the volume of the in- |
|
| put signal to control the wah effect, |
|
| this setting determines whether the |
|
| frequency of the filter will be |
|
| moved upward (UP) or downward |
|
| (DOWN). |
Frequency | Adjusts the frequency at which the | |
|
| wah effect will apply. |
Peak | Adjusts the amount of the wah ef- | |
|
| fect that will occur in the range of |
|
| the center frequency. |
|
| Set a higher value for Q to narrow |
|
| the range to be affected. |
Trigger Sens | Adjusts the sensitivity with which | |
|
| the wah effect is controlled. |
Parameter | Value | Description |
|
|
|
Rate | Frequency of modulation | |
| note |
|
Depth | Depth of modulation | |
Ps Low Freq | Frequency of the low range | |
Ps Low Gain | Gain of the low range | |
Ps Hi Freq | Frequency of the high range | |
Ps Hi Gain | Gain of the high range |
08: Humanizer
This adds a vowel character to the sound, making it similar to a human voice.
Parameter | Value | Description |
|
|
|
Overdrive | OFF, ON | Turns Drive on/off. |
Sw |
|
|
Drive | Degree of distortion | |
Vowel 1 | a, e, i, o, u | First vowel |
Vowel 2 | a, e, i, o, u | Second vowel |
Rate | Frequency at which the two vowels | |
| note | will be switched |
Depth | Effect depth | |
|
| With a setting of 0, it will be fixed at |
|
| Vowel 1. |
Trigger Sens | Level at which the two vowels will | |
|
| be switched |
|
| |
|
| is exceeded, the sound will change |
|
| to the other vowel at the frequency |
|
| (speed) specified by Rate. |
|
| LFO: The two vowel sounds will al- |
|
| ternate at the frequency specified |
|
| by Rate, regardless of the level. |
Ps Low Freq | Frequency of the low range | |
Ps Low Gain | Gain of the low range | |
Ps Hi Freq | Frequency of the high range | |
Ps Hi Gain | Gain of the high range |
46