Roland VC-2 owner manual Try Out the Sound Patch mode, Top Screen of Patch Mode, Selecting a Patch

Try Out the Sound (Patch mode)

The Top Screen of Patch Mode

1.Press [MODE].

The VC-2 MODE MENU window appears.

2.Touch <PATCH>.

The top screen appears.

*Please be aware that in the screen shots printed in this manual, the patch names may differ from the factory settings.

When the VC-2 starts up, the top screen of Patch mode will appear first.

The screen will depend on the patch algorithm (p. 8) group.

From the other screens of Patch mode, you can move to the top screen by touching <Top> at the bottom of the screen.

Selecting a Patch

Selecting Patches with the VALUE dial

1.Access the top screen of Patch mode.

2.Touch the patch number indication to highlight it.

3.Turn the VALUE dial or press [INC], [DEC].

You can switch more rapidly by holding down [SHIFT]

while you perform these operations.

Selecting Patches from the List

You can easily find the desired patch by selecting it from the

patch list.

1.Access the top screen of Patch mode.

2.Touch the patch algorithm indication located in the upper left of the screen. Alternatively, touch <▼MENU> in the upper right of the screen and then touch <PATCH List> in the pulldown menu.

The PATCH List window appears.

3.Select a patch from the list.

Either turn the VALUE dial or use [INC], [DEC] to select a patch. You can also select a patch by touching it on the display.

The on-screen keys have the following functions.

<P001–U192>: Change the buttons at both edges of the screen to P001–U192.

<U193–U448>: Change the buttons at both edges of the screen to U193–U448.

16