Effects List

 

 

 

 

 

12: Multi Tap Delay

Parameter

Value

Description

 

 

 

 

 

 

 

 

 

Delay

0–1300 ms

Adjusts the delay time from the di-

 

 

The effect has five delays. Each of the Delay Time parameters

Time

(MONO),

rect sound until the delay sound is

 

 

 

 

can be specified as a note length of the selected tempo. You

 

0–650 ms (STE-

heard.

 

 

 

 

 

can also set the panning and level of each delay sound.

 

REO, ALTER-

 

 

 

 

NATE), note

 

 

 

 

 

 

 

 

 

 

Parameter

Value

Description

L-R Shift

0–650 ms, note

Of the left and right delay sounds,

 

 

 

 

 

 

 

 

 

Delay 1–5

0–1300 ms,

Specifies the delay time from the

 

 

the delay time will be increased for

 

 

 

 

 

 

 

note

original sound until each delay

 

 

only one side.

 

 

 

 

 

If the L-R order is L→R, the R

 

 

 

 

sound (Delay 1/2/3/4/5) is heard.

 

 

sound will be later. In the case of

 

 

Fbk Dly

0–1300 ms,

Adjusts the delay time for the feed-

 

 

R→L, the L sound will be later.

 

 

Time

note

back sound

 

 

When the mode is set to MONO or

 

 

Feedback

-98– +98 %

Adjusts the proportion of the delay

 

 

ALTERNATE, this setting will be

 

 

 

 

 

 

 

 

sound that is fed back into the ef-

 

 

ignored.

 

 

 

 

 

 

 

 

 

 

fect. Negative (-) settings will in-

L-R Order

L→R, R→L

In STEREO or ALTERNATE mode,

 

 

 

 

vert the phase.

 

 

this setting determines which of the

 

 

Delay 1–5

0–127

Adjusts the volume of each delay

 

 

left or right sides has the delay

 

 

 

 

 

 

Level

 

sound (Delay 1/2/3/4/5)

 

 

sound before the other

 

 

 

 

 

 

 

Delay 1–5

L63–63R

Adjusts the pan of each delay

 

 

L→R: The left side is expressed first

 

 

 

 

 

 

Pan

 

sound (Delay 1/2/3/4/5)

 

 

R→L: The right side is expressed

 

 

 

 

 

first

 

 

Low Damp

50–4000 Hz

Adjusts the frequency below which

 

 

* In MONO mode, this setting will

 

 

Freq

 

sound fed back to the effect will be

 

 

be ignored.

 

 

 

 

cut.

 

 

 

 

 

 

 

The Low Damp function damps the

Feedback

-98– +98 %

Adjusts the proportion of the delay

 

 

 

 

 

 

 

 

low frequency band of the delay

 

 

sound that is fed back into the ef-

 

 

 

 

 

 

 

 

 

 

sound quicker than other bands,

 

 

fect. Negative (-) settings will in-

 

 

 

 

 

 

 

 

 

 

which makes for a clearer delay ef-

 

 

vert the phase.

 

 

 

 

 

 

 

 

 

 

fect.

Low Damp

50–4000 Hz

Adjusts the frequency below which

 

 

 

 

 

 

Low Damp

-36–0 dB

Degree of Low Damp

Freq

 

sound fed back to the effect will be

 

 

 

 

 

Gain

 

 

 

 

cut.

 

 

 

 

 

 

The Low Damp function damps the

 

 

Hi Damp

2000–20000 Hz

Adjusts the frequency above which

 

 

low frequency band of the delay

 

 

Freq

 

sound fed back to the effect will be

 

 

sound quicker than other bands,

 

 

 

 

cut.

 

 

which makes for a clearer delay ef-

 

 

 

 

High Damp, by attenuating the

 

 

fect.

 

 

 

 

higher frequencies first, makes the

 

 

 

 

 

 

 

delay sound more natural.

Low Damp

-36–0 dB

Degree of Low Damp

 

 

 

 

Gain

 

 

 

 

Hi Damp

-36–0 dB

Degree of High Damp

Hi Damp

2000–20000 Hz

Adjusts the frequency above which

 

 

Gain

 

 

Freq

 

sound fed back to the effect will be

 

 

Ps Low Freq

50–4000 Hz

Frequency of the low range

 

 

cut.

 

 

Ps Low Gain

-15– +15 dB

Gain of the low range

 

 

High Damp, by attenuating the

 

 

 

 

 

 

 

 

 

Ps Hi Freq

2000–20000 Hz

Frequency of the high range

 

 

higher frequencies first, makes the

 

 

 

 

 

 

Ps Hi Gain

-15– +15 dB

Gain of the high range

 

 

delay sound more natural.

 

 

 

 

 

 

 

 

 

 

Hi Damp

-36–0 dB

Degree of High Damp

 

 

 

 

 

Gain

 

 

 

 

 

 

 

Balance

DRY100:0WET–

Volume balance between the direct

 

 

 

 

 

 

DRY0:100WET

sound (DRY) and the delay sound

 

 

 

 

 

 

 

(WET)

 

 

 

 

 

Ps Low

50–4000 Hz

Frequency of the low range

 

 

 

 

 

Freq

 

 

 

 

 

 

 

Ps Low

-15– +15 dB

Gain of the low range

 

 

 

 

 

Gain

 

 

 

 

 

 

 

Ps Hi Freq

2000–20000 Hz

Frequency of the high range

 

 

 

 

 

Ps Hi Gain

-15– +15 dB

Gain of the high range

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

48

Page 48
Image 48
Roland VC-2 owner manual Multi Tap Delay, Effect has five delays. Each of the Delay Time parameters, REO, Alter, Wet