Chorus Parameters, Chorus Type | Roland VC-2 instruction

Effects List

Chorus Parameters

The functions of Chorus parameters are explained.

Chorus Type

01: Chorus 1

This conventional chorus effect adds spaciousness and depth to the sound. Slow modulation frequency with less depth.

02:Chorus 2

This conventional chorus effect adds spaciousness and depth to the sound. Rapid modulation frequency with less depth.

03: Chorus 3

This conventional chorus effect adds spaciousness and depth to the sound. Slow modulation frequency with more depth.

04: Chorus 4

This conventional chorus effect adds spaciousness and depth to the sound. Rapid modulation frequency with more depth.

05: Feedback Chorus

This chorus offers a flanger-like effect, creating a soft sound.

06: Flanger

This effect sounds somewhat like a jet airplane taking off and landing.

07: Short Delay

This is a delay with a short delay time.

08: Fbk Short Delay

This is a short delay with many repeats.

Chorus Parameters

Parameter	Value	Description

Pre Low Freq	500–15000 Hz,	Frequency of the low range (TH-
	THRU	RU: no filter is used)
Pre Hi Freq	THRU, 50–800	Frequency of the high range (TH-
	Hz	RU: no filter is used)
Pre Dly Time	0–50.0 ms	Adjusts the delay time from the
		direct sound until the chorus
		sound is heard.
Co LPF Freq	500–15000 Hz,	Adjusts the cutoff frequency of
	THRU	the low pass filter. (THRU: no fil-
		ter is used)
		The effect will be applied to the
		frequency range below the cutoff
		frequency.
Co HPF Freq	THRU, 50–800	Adjusts the cutoff frequency of
	Hz	the high pass filter. (THRU: no
		filter is used)
		The effect will be applied to the
		frequency range above the cutoff
		frequency.
Rate	0.05–10.0 Hz,	Sets the cycle for the chorus or
	note	flanger sound undulations.
Depth	0–127	Adjusts the depth of modulation
		for the chorus or flanger.
Feedback	-98– +98 %	Adjusts the proportion of the ef-
		fect sound that is fed back into
		the effect. Negative (-) settings
		will invert the phase.
Cho/Flg Sw	CHORUS,	Selects either chorus or flanger.
	FLANGER

61

Image 61

Roland VC-2 owner manual Chorus Parameters, Chorus Type

Contents

03897845 ’05-3-1N Page Page Table of Contents Table of Contents Conventions Used in This Manual Main Features Internal Structure About the VC-2 Patch Algorithms Project Memory StructureWork Area/Temporary Area Internal Memory / PC Card MIC Switch VolumePanel Descriptions Input KEY PAD Button Display Power Switch14 E1-E8 knobs PC Card Slot AC Inlet Midi Connectors IN, OUT, ThruInput Jacks L, R Direct OUT Jacks L, R Connect your mic to the front panel MIC jack Making connections Fig.Q-02.e Starting up VC-2 Top Screen of Patch Mode Try Out the Sound Patch modeSelecting a Patch Selecting Patches with the Value dial Playing Using buttons to select patchesEnabling or Disabling Beep Tone Common to all patch algorithms Parameters in the Top ScreenIf the patch algorithm is Modeling~ If the patch algorithm is Vocoder~ If the patch algorithm is Processor Type If the patch algorithm is Keyboard~ Creating Patches Basic Procedure for Patch EditingChanging the Pitch Patch Tune Pulldown menu, touch Data Transfer Transmitting Data to an External Midi Device Data TransferSource, select the type of data that you want to transmit Saving Patches Patch Write Naming a Patch Patch NameAuditioning the Save-Destination Patch Compare Deleting Patches Patch Delete Copying Patch Controller SettingsPatch Controller Copy Top Screen System MIC Setting Screen NS-COMP PRE-EFX Type Pre-Effect TypesOFF NS-LIMIT Noise SUP Carrier ScreenOSC OSC 1/OSC INF1 OSC2 Pitch Pitch OSC1 PitchGlide Vibrato Portamento KEY Assign Carrier Screen for Processor~ Wave Screen Poly Pitch Shifter Screen Vocoder Screen Poly Pitch Shifter ControllerPitch / EQ Growl / TVA / Ctrl Routing Effect Screen CHO MFXREV MFX Type Importing Individual Wave Files Wave Import Using Waves Wave Mode Copying a Wave Wave Copy Using the Wave BrowserMoving a Wave Wave Move Exchanging a Wave Wave Exchange Write How to Make the System Function SettingsInit Touch System Functions of System Parameters Settings Common to the Entire System Common MasterViewing VC-2’s Information Information Pulldown menu, touch Info Chord Memory MIDI/USB Audio I/F Controller Settings ControllerBreath Loading a Project from Disk Load Project Saving a Project on Disk Save Project Touch Execute to execute the Factory Reset Touch Factory ResetFactory Reset screen appears Backing Up Data to Your Computer USB Mode MFX Parameters Effects ListParametric EQ Parametric Equalizer Graphic EQ Graphic Equalizer Isolator and Filter Resonant Filter Distortion / OD Specifications of each Speaker TypeDistortion / Overdrive Amp Simulator Guitar Amp Humanizer Auto WahRecommended combination of pre-amp and speaker Dynamic Processor Stereo Dynamic Processor Stereo DelayTape Echo Simulator Effect has five delays. Each of the Delay Time parameters Multi Tap DelayCan also set the panning and level of each delay sound REO, Alter Band Pass Delay Reverse DelayVocal Echo Delay Pan Type Analog Delay→ChorusDigital Chorus Hexa Chorus Space ChorusAnalog Flanger Boss Flanger Step Flanger Analog Phaser Tremolo/Auto Pan Digital PhaserRotary 28 OD/DS→Cho/Flg Overdrive Signal up to one octave up or downDistortion→Chorus/Flanger Stereo Pitch Shifter Overdrive/Distortion→Delay 29 OD/DS→Delay30 Cho/Flg→Delay Chorus/Flanger→Delay 31 Enh→Cho/Flg 32 Enh→Delay Enhancer→DelayEnhancer→Chorus/Flanger Vocal Multi LPF Thru Guitar MultiHPF 36 E.Piano Multi Bass Multi Phonograph Keyboard Multi Bit Rate Converter Radio TuningPseudo Stereo This effect reproduces the sound of an AM radio playing Chorus Type Chorus ParametersChorus Parameters Stereo Plate Reverb ParametersStereo OperaHouse Stereo StudioSpring Stereo Room Stereo EchoesStereo Cathedral Stereo Church Room Hall Hall Garage Specifications Midi Implementation Chart CHO Index Volume System mode Temporary AreaREV Type Reverb type Save Project