Roland VC-2 Effect Screen

32
Creating/Editing Patches (Patch mode)
You can go to the top screen by touching <Effect> in the
lower part of the screen.
MFX (MFX On/Off Switch)
Switches MFX on and off.
Value: (OFF), (ON)
MFX Type
Use this parameter to select from among the 41 available MFX.
For details on MFX parameters, refer to “ MFX Parameters ”
(p. 43).
Value: 00 (Thru)–41
MFX Master Level
Adjusts the volume of the sound that has passed through the
MFX.
Value: 0–127
MFX To CHO (MFX Chorus Send Level)
Adjusts the amount of chorus for the sound that passes
through MFX. If you don’t want to add the Chorus effect, set it
to “0.”
Value: 0–127
MFX To REV (MFX Reverb Send Level)
Adjusts the amount of reverb for the sound that passes
through MFX. If you don’t want to add the Reverb effect, set it
to “0.”
Value: 0–127
CHO (Chorus On/Off Switch)
Switches chorus on and off.
Value: (OFF), (ON)
CHO Type (Chorus Type)
Use this parameter to select from among the 8 available
chorus. For details on chorus parameters, refer to “ Chorus
Parameters ” (p. 61).
Value: 00 (Off)–08
CHO Master Level (Chorus Master Level)
Adjusts the volume of the sound that has passed through
chorus.
Value: 0–127
CHO To REV (Chorus Reverb Send Level)
Adjusts the amount of reverb for the sound that passes
through chorus. If you don’t want to add the Reverb effect, set
it to “0.”
Value: 0–127
REV (Reverb On/Off Switch)
Switches reverb on and off.
Value: (OFF), (ON)
REV Type (Reverb Type)
Use this parameter to select from among the 14 available
reverb. For details on reverb parameters, refer to “ Reverb
Parameters ” (p. 62).
Value: 00 (Off)–14
REV Master Level (Reverb Master Level)
Adjusts the volume of the sound that has passed through
reverb.
Value: 0–127
Effect Screen
Routing
vc2_for_XT_e1 32ページ ２００５年３月８日 火曜日 午後４時５２分