Roland VC-2 29 OD/DS→Delay, Overdrive/Distortion→Delay, 30 Cho/Flg→Delay, Chorus/Flanger→Delay

					Effects List
29: OD/DS→Delay
			Parameter	Value	Description
(Overdrive/Distortion→Delay)
			Mod Depth	0–127	Adjusts the depth of modulation
This effect connects either Overdrive or Distortion and Delay					for the chorus or flanger.
			Mod Phase	0–180 deg	Sets how the chorus or flanger
in series.
					sound is spread.
			Mod Pre De-	0–50.0 ms	Adjusts the delay time from the di-
Parameter	Value	Description
			lay		rect sound until the chorus or
Drive Mode	OD, DS	Selects whether to use overdrive
					flanger sound is heard.
		(OD) or distortion (DS).
			Mod Feed-	-98– +98%	Adjusts the proportion of the effect
Drive	0–127	Degree of distortion
			back		sound that is fed back into the ef-
Amp Sim Sw	OFF, ON	Turns the amp simulator on/off.			fect. Negative (-) settings will in-
Amp Type	SMALL,	Type of guitar amp			vert the phase.
	BUILT-IN,	SMALL: small amp	Xover Low-	50–4000 Hz	Attenuates the effect in the range
	2-STACK,	BUILT-IN: single-unit type amp	Freq		below the specified frequency.
	3-STACK	2-STACK: large double stack amp
			Xover Low	-36–0 dB	Specifies how greatly the low range
		3-STACK: large triple stack amp
			Gain		will be attenuated.
Distortion	0–127	Volume of the overdrive or distor-
			Xover Hi-	2000–20000 Hz	Attenuates the effect in the range
(DS) Level		tion sound.
			Freq		above the specified frequency.
Delay Time	0–1300 ms,	Adjusts the delay time from the di-
			Xover Hi	-36–0 dB	Specifies how greatly the high
	note	rect sound until the delay sound is
			Gain		range will be attenuated.
		heard.
			Mod Level	0–127	Volume of the chorus or flanger
Delay Feed-	-98– +98 %	Adjusts the proportion of the delay
					sound.
back		sound that is fed back into the ef-
			Delay Time	0–1300 ms,	Adjusts the delay time from the di-
		fect. Negative (-) settings will in-
				note	rect sound until the delay sound is
		vert the phase.
					heard.
Low Damp	50–4000 Hz	Adjusts the frequency below
			Delay Feed-	-98– +98%	Adjusts the proportion of the delay
Freq		which sound fed back to the effect
			back		sound that is fed back into the ef-
		will be cut.
					fect. Negative (-) settings will in-
		The Low Damp function damps
					vert the phase.
		the low frequency band of the de-
		lay sound quicker than other	Low Damp	50–4000 Hz	Adjusts the frequency below which
		bands, which makes for a clearer	Freq		sound fed back to the effect will be
		delay effect.			cut.
Low Damp	-36–0 dB	Degree of Low Damp			The Low Damp function damps the
					low frequency band of the delay
Gain
					sound quicker than other bands,
Hi Damp	2000–20000 Hz	Adjusts the frequency above
					which makes for a clearer delay ef-
Freq		which sound fed back to the effect
					fect.
		will be cut.
			Low Damp	-36–0 dB	Degree of Low Damp
		High Damp, by attenuating the
			Gain
		higher frequencies first, makes the
		delay sound more natural.	Hi Damp	2000–20000 Hz	Adjusts the frequency above which
Hi Damp	-36–0 dB	Degree of High Damp	Freq		sound fed back to the effect will be
					cut.
Gain
					High Damp, by attenuating the
Delay Level	0–127	Volume of the delay sound.
					higher frequencies first, makes the
Ps Low Freq	50–4000 Hz	Frequency of the low range			delay sound more natural.
Ps Low Gain	-15– +15 dB	Gain of the low range	Hi Damp	-36–0 dB	Degree of High Damp
Ps Hi Freq	2000–20000 Hz	Frequency of the high range	Gain
			Delay Level	0–127	Volume of the delay sound.
Ps Hi Gain	-15– +15 dB	Gain of the high range
			Ps Low Freq	50–4000 Hz	Frequency of the low range
30: Cho/Flg→Delay			Ps Low Gain	-15– +15 dB	Gain of the low range
			Ps Hi Freq	2000–20000 Hz	Frequency of the high range
(Chorus/Flanger→Delay)
			Ps Hi Gain	-15– +15 dB	Gain of the high range
This effect connects either Chorus or Flanger and Delay in
series.
Parameter	Value	Description
Mod Mode	CHORUS,	Selects whether to use chorus or
	FLANGER	flanger.
Mod Rate	0.05–10.0 Hz,	Adjusts the speed of modulation
	note	for the chorus or flanger.

55