FEATURES
Programming track numbers
You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program.
1 While playback is stopped, select a track with ° or ¤.
2Press PROGRAM to store the track.
yPROGRAM lights up; the track number programmed and P with the total number of
stored tracks are displayed.
3Select and store all desired tracks in this way.
4 Press 2; to start playback of your selected tracks. y PROGRAM is shown and playback starts.
•You can review the program by pressing PROGRAM for more than 2 seconds. y The display shows all the stored tracks in sequence.
Notes: – If you press PROGRAM and there is no track selected, SELECt is displayed.
– If you try to store more than 30 tracks, FULL is displayed.
Clearing the program
•While playback is stopped, press 9 to clear . program
y CLEAr is displayed once, PROGRAM goes off, and the program is cleared.
Note: The program will also be cleared if the power supply is interrupted, or if the
English
15