Nexus 21 TH52 operation manual Function overview of the Sea Data, Instrument backlight

Page 20

Sea Data Set TH52

English

4.3Instrument backlight

The back light may be switched on at the Sea Data or wind instrument.

1. Press and hold PAGE 2 sec

2. Select backlight level with PLUS

3. Set the light level with SET

5 Function overview of the Sea Data

The functions in the Sea Data instrument are divided into 2 pages:

SPEED and DEPTH.

The selected page is indicated by the LCD mark at top of the display.

Each page has 2 types of functions that can be displayed together:

1.Main-function, displayed at the top of the display in 30 mm high digits.

2.Sub-function, displayed at the bottom part of the display in 17 mm high digits.

You can easily customise your favourite combination of functions, (See 9).

The instrument can display metric and imperial units.

For unit selection, (see 9).

For function overview and transducers needed to display each function, see below.

19

Image 20

Contents NX Sea Data Set Sea Data Set TH52 English Edition April Speed functions 10.1 Part specification Registering this productNX Sea Data Installation Installation includes 6 major stepsFollowing material is needed Wire cutters and strippers Few do not you should considerInstalling the instrument Installing the WSI-box Example Sea Data Set TH52 English Installing Installing the through hull fittingsBedding Hole DrillingSea Data Set TH52 English Installation in a Cored Fiberglass Hull Checking for LeaksSea Data Set TH52 English Electrical Installation First start Initialising the instrumentHow to use the push-buttons of the Sea Data Main Subfunction Function Clear Minus Plus SETFunction overview of the Sea Data Instrument backlightSpeed sub-functions Speed functionsSpeed main-function Maximum Speed MAX Depth unit/DPTBarometric pressure unit/hPA Depth functionsBoat Speed BSP/unit Clear an alarm value Set shallow SHA and depth alarm DEASet and turn on anchor alarm ANC Silencing an alarm Turning OFF or on an alarmSelect power on function Cancel a moved or locked sub-functionCustomise your display Move and lock a sub-functionCalibration setting up the Sea Data instrument Calibration of speed C10Return C10 RET Unit for Speed, C11 Unit KTSAdjust Depth readings, C15 00.0 ADJ Damping of Speed, C13 SEAUnit for Depth readings, C14 Unit m Unit for Temp readings, C16 UnitCAdjustment of Temp reading,C17 0C TMP Adjustment of Wind Angle, C20 000 ADJKey beep setting, C22 OFF KEY Unit for Air Pressure, C18 Unit hPAMaintenance and fault finding MaintenanceFault finding General fault findingFault action Speed and distance functions No reading Wind No readingTechnical specifications WSI-box SpecificationsTechnical specifications Sea Data Waranty Sea Data Set TH52 English English Sea Data Set TH52 Nexus Marine AB