Nexus 21 TH52 operation manual Installing the WSI-box

Page 10

Sea Data Set TH52

English

2.2Installing the WSI-box

Remove the WSI-box cover from the base plate by removing the screw. Drill the 3 screw holes using a 2.8 mm (0.11") drill. Mount the WSI-box using the 3 mounting screws.

Apply silicon paste on the screw terminal. Connect the 8 m Nexus Network cable supplied with cable protectors to the WSI-box on pins 13, 14, 15, and 16. Match the colour codes for each wire.

9

Image 10

Contents NX Sea Data Set Sea Data Set TH52 English Edition April Speed functions 10.1 Part specification Registering this productNX Sea Data Following material is needed Wire cutters and strippers InstallationInstallation includes 6 major steps Few do not you should considerInstalling the instrument Installing the WSI-box Example Sea Data Set TH52 English Bedding InstallingInstalling the through hull fittings Hole DrillingSea Data Set TH52 English Installation in a Cored Fiberglass Hull Checking for LeaksSea Data Set TH52 English Electrical Installation First start Initialising the instrumentHow to use the push-buttons of the Sea Data Main Subfunction Function Clear Minus Plus SETFunction overview of the Sea Data Instrument backlightSpeed main-function Speed functionsSpeed sub-functions Maximum Speed MAX Depth unit/DPTBoat Speed BSP/unit Depth functionsBarometric pressure unit/hPA Set and turn on anchor alarm ANC Set shallow SHA and depth alarm DEAClear an alarm value Silencing an alarm Turning OFF or on an alarmCustomise your display Select power on functionCancel a moved or locked sub-function Move and lock a sub-functionReturn C10 RET Calibration setting up the Sea Data instrumentCalibration of speed C10 Unit for Speed, C11 Unit KTSUnit for Depth readings, C14 Unit m Adjust Depth readings, C15 00.0 ADJDamping of Speed, C13 SEA Unit for Temp readings, C16 UnitCKey beep setting, C22 OFF KEY Adjustment of Temp reading,C17 0C TMPAdjustment of Wind Angle, C20 000 ADJ Unit for Air Pressure, C18 Unit hPAFault finding Maintenance and fault findingMaintenance General fault findingFault action Speed and distance functions No reading Wind No readingTechnical specifications Sea Data SpecificationsTechnical specifications WSI-box Waranty Sea Data Set TH52 English English Sea Data Set TH52 Nexus Marine AB