Hawking Technology 108G manual Parameters Description Host Name, MAC Address

Page 20

1.1 Cable Modem

Choose Cable Modem if your ISP will automatically give you an IP address or if you know your connection uses a coax cable as your internet pipeline (cable-TV cable) Some ISP’s may also require that you fill in additional information such as Host Name and MAC address (see screen below).

Note: The Host Name and MAC address section is optional and you can skip this section if your ISP does not require these settings for you to connect to the Internet.

Parameters

Description

Host Name

If your ISP requires a Host Name, type in the host name

 

provided by your ISP, otherwise leave it blank if your ISP does

 

not require a Host Name.

MAC Address

Your ISP may require a particular MAC address in order for you to connect to the Internet. This MAC address is the PC’s MAC address that your ISP had originally connected your Internet connection to. Type in this MAC address in this section or use the “Clone MAC Address” button to replace the WAN MAC address with the MAC address of that PC (you have to be using that PC for the Clone MAC Address button to work). To find out the PC’s MAC address see Appendix A. (see Glossary for an explanation on MAC address)

20

Image 20
Contents Page Minimum Requirements Getting to know the Hi-Gain Wireless-108G Mimo RouterIntroduction Device Status Features Package ContentReset Antenna Connector ANTPower DC-12v Local Area Network LANFront Panel Light Status DescriptionSetup Diagram Below shows a typical setup for a Local Area Network LANWith the Setup CD Mac Fixed IP Configuration2a Windows 95/98/Me Configure your PC to obtain an IP address automatically∙ DNS Configuration Select Disable DNS 2b Windows XP 2c Windows 2d Windows NT ∙ IP Address Select Obtain an IP address from a Dhcp server Advanced Menu Chapter Setup …Quick Setup Wizard Chapter Quick Setup Wizard Chapter Advanced Menu Chapter Menu DescriptionStatus Information Chapter Status Information ChapterLogout Built-in Ethernet Users Wired Using a AirPort Card or AirPort Extreme CardCheck Signal Strength End Daylight Savings Time Enable Daylight SavingsTime Server Address Cable Modem Fixed-IP xDSL PPPoE Pptp L2TP Parameters Description Host Name MAC AddressParameters Description Gateway IP Subnet MaskParameter Description User Name PasswordService Name Connect to the ISP when someone want to use the Internet Keep connected until the WAN idle timeout. The routerOne is using the Internet exceeds the Idle Time When you click Connect manually from the Web userGateway User ID Password Pptp Gateway Select this item if you are using the service provided byConnection ID This is the ID given by ISP. This is optional Bezeq in IsraelL2TP User ID L2TP GatewayPage LAN Menu Description SystemWAN QoS You can setup the QoS bandwidth control policy NAT FirewallPassword Settings Parameters DescriptionTime Zone Remote ManagementEnd Daylight Savings Time Parameters Description Current Password New PasswordPort Port number of remote management web interface Enabled Parameters Description Host AddressPage Dynamic IP address Your ISP has given you an IP address alreadyDynamic IP Parameters Description Domain Name Server DNS Server Secondary DNS Address optionalParameters Default Description Enable/Disable Password/KeyProvider Domain nameParameters Default Description 802.1d Spanning Tree DisabledIP Subnet Mask Dhcp ServerLease Time IP Address PoolWireless module function Airport Express Client Mode Configuration Wireless Modes AP Bridge-Point to Point Wireless Modes AP Bridge-Point to Multi-Point Wireless Modes AP Bridge-WDS Parameters Default Description Mode BandFragment Threshold specifies the maximum CTS Protection Security Key Format 3.3 802.1x WEP Static key Wpatkip WPA Radius Page Access Control QoS Bandwidth Edit QoS RuleParameters Description Rule Name Page Virtual Server UPnP SettingParameter Description Port Forwarding ALG Setting Static Routing Parameter Description Enable Port Forwarding Click Add. Then this Port Forwarding setting Parameters Description Enable Virtual Server Private IP Private PortType Example Virtual Server Special Applications Example Comment Description of this settingExample Special Applications UPnP Settings Page Static Routing Page Parameters Description Access Control 4 DMZFilter client PCs by IP Fill IP Filtering Table to filter PC clients by IPAdd PC Example Access Control URL Blocking Intrusion Detection Feature Ping of Death Discard Ping From WAN Port Scan Sync Flood4 DMZ ParametersDescription Statistics Shows the statistics Parameters Description InformationParametersDescription Internet Connection Device Status ParametersDescription Device StatusSystem Log Parameters Description System LogParametersDescription Security Log ParametersDescription Active Dhcp Client Parameters Description Statistics Firmware Upgrade Reset ParametersDescription Configuration Tools ParametersDescription Firmware Upgrade Parameters Description Reset Common Issues for Mac Users How do I File Share without using Apple Talk? For Mac OS How to Manually find your Windows PC’s IP and MAC address Appendix aGlossary TCP FTP Smtp POP3 Page Customer Service Hawking Technologies, Inc USASales and Product Information Public Relations