Hawking Technology 108G manual CTS Protection

Page 49

DTIM Period

The DTIM period you specify here indicates

 

how often the clients served by this access

 

point should check for buffered data still on

 

the AP awaiting pickup.

Data Rate

Preamble Type

Broadcast ESSID

The “Data Rate” is the rate this access point uses to transmit data packets. The access point will use the highest possible selected transmission rate to transmit the data packets.

The “Long Preamble” can provide better wireless LAN compatibility while the “Short Preamble” can provide better wireless LAN performance.

If you enable “Broadcast ESSID”, every wireless station located within the coverage of this access point can discover this access point easily. If you are building a public wireless network, enabling this feature is recommended. Disabling “Broadcast ESSID” can provi de better security.

CTS Protection

It is recommended to enable the protection

mechanism. This mechanism can decrease the

rate of data collision between 802.11b and

802.11g wireless stations. When the protection

mode is enabled, the throughput of the AP will

be a little lower due to many of frame traffic

should be transmitted.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router.

49

Image 49
Contents Page Introduction Getting to know the Hi-Gain Wireless-108G Mimo RouterMinimum Requirements Device Status Package Content FeaturesAntenna Connector ANT ResetPower DC-12v Local Area Network LANLight Status Description Front PanelBelow shows a typical setup for a Local Area Network LAN Setup DiagramMac Fixed IP Configuration With the Setup CD∙ DNS Configuration Select Disable DNS Configure your PC to obtain an IP address automatically2a Windows 95/98/Me 2b Windows XP 2c Windows 2d Windows NT ∙ IP Address Select Obtain an IP address from a Dhcp server Quick Setup Wizard Chapter Setup …Advanced Menu Chapter Menu Description Quick Setup Wizard Chapter Advanced Menu ChapterStatus Information Chapter Status Information ChapterLogout Check Signal Strength Using a AirPort Card or AirPort Extreme CardBuilt-in Ethernet Users Wired Time Server Address Enable Daylight SavingsEnd Daylight Savings Time Cable Modem Fixed-IP xDSL PPPoE Pptp L2TP MAC Address Parameters Description Host NameSubnet Mask Parameters Description Gateway IPService Name PasswordParameter Description User Name Keep connected until the WAN idle timeout. The router Connect to the ISP when someone want to use the InternetOne is using the Internet exceeds the Idle Time When you click Connect manually from the Web userGateway Select this item if you are using the service provided by User ID Password Pptp GatewayConnection ID This is the ID given by ISP. This is optional Bezeq in IsraelL2TP L2TP Gateway User IDPage WAN Menu Description SystemLAN Firewall QoS You can setup the QoS bandwidth control policy NATParameters Description Password SettingsTime Zone Remote ManagementEnd Daylight Savings Time New Password Parameters Description Current PasswordParameters Description Host Address Port Port number of remote management web interface EnabledPage Your ISP has given you an IP address already Dynamic IP addressDynamic IP Secondary DNS Address optional Parameters Description Domain Name Server DNS ServerPassword/Key Parameters Default Description Enable/DisableProvider Domain name802.1d Spanning Tree Disabled Parameters Default DescriptionIP Subnet Mask Dhcp ServerIP Address Pool Lease TimeWireless module function Airport Express Client Mode Configuration Wireless Modes AP Bridge-Point to Point Wireless Modes AP Bridge-Point to Multi-Point Wireless Modes AP Bridge-WDS Band Parameters Default Description ModeFragment Threshold specifies the maximum CTS Protection Security Key Format 3.3 802.1x WEP Static key Wpatkip WPA Radius Page Access Control QoS Parameters Description Rule Name Edit QoS RuleBandwidth Page Parameter Description Port Forwarding UPnP SettingVirtual Server ALG Setting Static Routing Parameter Description Enable Port Forwarding Click Add. Then this Port Forwarding setting Private Port Parameters Description Enable Virtual Server Private IPType Example Virtual Server Special Applications Example Special Applications Comment Description of this settingExample UPnP Settings Page Static Routing Page 4 DMZ Parameters Description Access ControlFill IP Filtering Table to filter PC clients by IP Filter client PCs by IPAdd PC Example Access Control URL Blocking Ping of Death Discard Ping From WAN Port Scan Sync Flood Intrusion Detection Feature4 DMZ ParametersDescription Parameters Description Information Statistics Shows the statisticsParametersDescription Internet Connection ParametersDescription Device Status Device StatusParameters Description System Log System LogParametersDescription Security Log ParametersDescription Active Dhcp Client Parameters Description Statistics Firmware Upgrade Reset ParametersDescription Configuration Tools ParametersDescription Firmware Upgrade Parameters Description Reset Common Issues for Mac Users How do I File Share without using Apple Talk? For Mac OS Appendix a How to Manually find your Windows PC’s IP and MAC addressGlossary TCP FTP Smtp POP3 Page Hawking Technologies, Inc USA Customer ServiceSales and Product Information Public Relations