Hawking Technology 108G manual Parameters Default Description Mode, Band

Parameters	Default	Description
Mode		It allows you to set the AP to AP, Bridge or WDS
		mode.
Band		It allows you to set the AP fix at 802.11b or
		802.11g mode. You also can select B+G mode
		to allow the AP select 802.11b and 802.11g
		connection automatically.
ESSID	default	This is the name of the wireless LAN. All the
		devices in the same wireless LAN should have
		the same ESSID.
Channel Number	11	The channel used by the wireless LAN. All
		devices in the same wireless LAN should
		use the same channel.

MAC address

If you want to bridge more than one networks together with wireless LAN, you have to set this access point to “AP Bridge-Point to Point mode”, “AP Bridge-Point to Multi-Point mode” or “AP Bridge-WDS mode”. You have to enter the MAC addresses of other access points that join the bridging work.

Set Security	Click the “Set Security” button, then a
	“WDS Security Settings” will pop up. You
	can set the security parameters used to
	bridge access points together here when
	your AP is in AP Bridge modes. You can
	refer to section 4.3 “Security Settings” for
	how to set the parameters.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

47