Hawking Technology 108G manual Add PC

Page 75

want remove all PCs from the table, just click "Delete All" button.

Filter client PC by MAC address Check “Enable MAC Filtering” to enable MAC

 

Filtering.

Add PC

Fill in “Client PC MAC Address” and “Comment”

 

of the PC that is allowed to access the Internet, and

 

then click “Add”. If you find any typo before

 

adding it and want to retype again, just click

 

"Reset" and the fields will be cleared.

Remove PC

If you want to remove some PC from the "MAC

 

Filtering Table", select the PC you want to remove

 

in the table and then click "Delete Selected". If you

 

want remove all PCs from the table, just click

 

"Delete All" button. If you want to clear the

 

selection and re-select again, just click “Reset”.

You can now configure other advance sections or start using the router (with the advance settings in place)

Add PC

Parameters

Description

Client PC Description

The description for this client PC rule.

Client PC IP Addresses

Enter the IP address range that you wish to apply this

 

Access Control rule. This is the user’s IP address(es)

 

that you wish to setup an Access Control rule.

 

Note: You need to give your LAN PC clients a

 

fixed/static IP address for the Access Control rule to

 

work properly.

Client PC Service

You can block the clients from accessing some

 

Internet services by checking the services you want

 

to block.

Protocol

This allows you to select UDP, TCP or both

 

protocol type you want to block.

Port Range

It can be assign up to five port ranges. The router

 

will block clients from accessing Internet services

 

that use these ports.

 

 

 

75

Image 75
Contents Page Getting to know the Hi-Gain Wireless-108G Mimo Router IntroductionMinimum Requirements Device Status Package Content FeaturesLocal Area Network LAN ResetAntenna Connector ANT Power DC-12vLight Status Description Front PanelBelow shows a typical setup for a Local Area Network LAN Setup DiagramMac Fixed IP Configuration With the Setup CDConfigure your PC to obtain an IP address automatically ∙ DNS Configuration Select Disable DNS2a Windows 95/98/Me 2b Windows XP 2c Windows 2d Windows NT ∙ IP Address Select Obtain an IP address from a Dhcp server Setup … Quick Setup Wizard ChapterAdvanced Menu Chapter Status Information Chapter Quick Setup Wizard Chapter Advanced Menu ChapterMenu Description Status Information ChapterLogout Using a AirPort Card or AirPort Extreme Card Check Signal StrengthBuilt-in Ethernet Users Wired Enable Daylight Savings Time Server AddressEnd Daylight Savings Time Cable Modem Fixed-IP xDSL PPPoE Pptp L2TP MAC Address Parameters Description Host NameSubnet Mask Parameters Description Gateway IPPassword Service NameParameter Description User Name When you click Connect manually from the Web user Connect to the ISP when someone want to use the InternetKeep connected until the WAN idle timeout. The router One is using the Internet exceeds the Idle TimeGateway Bezeq in Israel User ID Password Pptp GatewaySelect this item if you are using the service provided by Connection ID This is the ID given by ISP. This is optionalL2TP L2TP Gateway User IDPage Menu Description System WANLAN Firewall QoS You can setup the QoS bandwidth control policy NATRemote Management Password SettingsParameters Description Time ZoneEnd Daylight Savings Time New Password Parameters Description Current PasswordParameters Description Host Address Port Port number of remote management web interface EnabledPage Your ISP has given you an IP address already Dynamic IP addressDynamic IP Secondary DNS Address optional Parameters Description Domain Name Server DNS ServerDomain name Parameters Default Description Enable/DisablePassword/Key ProviderDhcp Server Parameters Default Description802.1d Spanning Tree Disabled IP Subnet MaskIP Address Pool Lease TimeWireless module function Airport Express Client Mode Configuration Wireless Modes AP Bridge-Point to Point Wireless Modes AP Bridge-Point to Multi-Point Wireless Modes AP Bridge-WDS Band Parameters Default Description ModeFragment Threshold specifies the maximum CTS Protection Security Key Format 3.3 802.1x WEP Static key Wpatkip WPA Radius Page Access Control QoS Edit QoS Rule Parameters Description Rule NameBandwidth Page UPnP Setting Parameter Description Port ForwardingVirtual Server ALG Setting Static Routing Parameter Description Enable Port Forwarding Click Add. Then this Port Forwarding setting Private Port Parameters Description Enable Virtual Server Private IPType Example Virtual Server Special Applications Comment Description of this setting Example Special ApplicationsExample UPnP Settings Page Static Routing Page 4 DMZ Parameters Description Access ControlFill IP Filtering Table to filter PC clients by IP Filter client PCs by IPAdd PC Example Access Control URL Blocking Ping of Death Discard Ping From WAN Port Scan Sync Flood Intrusion Detection Feature4 DMZ ParametersDescription Parameters Description Information Statistics Shows the statisticsParametersDescription Internet Connection ParametersDescription Device Status Device StatusParameters Description System Log System LogParametersDescription Security Log ParametersDescription Active Dhcp Client Parameters Description Statistics Firmware Upgrade Reset ParametersDescription Configuration Tools ParametersDescription Firmware Upgrade Parameters Description Reset Common Issues for Mac Users How do I File Share without using Apple Talk? For Mac OS Appendix a How to Manually find your Windows PC’s IP and MAC addressGlossary TCP FTP Smtp POP3 Page Public Relations Customer ServiceHawking Technologies, Inc USA Sales and Product Information