Hawking Technology 108G manual Key Format, 3.2 802.1x only

Key Format	You may select to select ASCII Characters
	(alphanumeric format) or Hexadecimal Digits (in
	the "A-F", "a-f" and "0-9" range) to be the WEP
	Key.
	For example:
	ASCII Characters: guest
	Hexadecimal Digits: 12345abcde
Default Key	Select one of the four keys to encrypt your data.
	Only the key you select it in the "Default key" will
	take effect.
Key 1 - Key 4	The WEP keys are used to encrypt data
	transmitted in the wireless network. Fill the text
	box by following the rules below.
	64-bit WEP: input 10-digit Hex values (in the "A-
	F", "a-f" and "0-9" range) or 5-digit ASCII
	character as the encryption keys.
	128-bit WEP: input 26-digit Hex values (in the
	"A-F", "a-f" and "0-9" range) or 13-digit ASCII
	characters as the encryption keys.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

2.4.3.2 802.1x only

IEEE 802.1x is an authentication protocol. Every user must use a valid account to login to this Access Point before accessing the wireless LAN. The authentication is processed by a RADIUS server. This mode only authenticates user by IEEE 802.1x, but it does not encryption the data during communication.

Parameters	Default	Description
RADIUS Server IP address		The IP address of external RADIUS server.
RADIUS Server Port		The service port of the external RADIUS server.
RADIUS Server Password		The password used by external RADIUS server.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

51