Hawking Technology 108G manual Parameter Description User Name, Password, Service Name

Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for the Fixed-IP x DSL connection. You can start using the router now, if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.

1.3 PPPoE

Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all the information required in this section.

Parameter	Description
User Name	Enter the User Name provided by your ISP for the PPPoE
	connection
Password	Enter the Password provided by your ISP for the PPPoE
	connection
Service Name	This is optional. Enter the Service name should your ISP
	requires it, otherwise leave it blank.
MTU	This is optional. You can specify the maximum size of your
	transmission packet to the Internet. Leave it as it is if you to not
	wish to set a maximum packet size.
Connection Type	If you select “Continuous ”, the router will always connect
	to the ISP. If the WAN line breaks down and links again,
	the router will auto-reconnect to the ISP.
	22