Type | Select the port number protocol type (TCP, UDP or both). If you |
| are unsure, then leave it to the default both protocol. |
Public Port | Enter the service (service/Internet application) port number |
| from the Internet that will be |
| address host in your LAN |
| Note: Virtual Server function will have priority over the DMZ |
| function if there is a conflict between the Virtual Server and the |
| DMZ settings. |
Comment | The description of this setting. |
Add Virtual Server | Fill in the "Private IP", "Private Port", "Type", “Public |
| Port” and "Comment" of the setting to be added and then |
| click "Add". Then this Virtual Server setting will be added |
| into the "Current Virtual Server Table" below. If you find |
| any typo before adding it and want to retype again, just |
| click "Clear" and the fields will be cleared. |
Remove Virtual Server | If you want to remove some Virtual Server settings from |
| the " Current Virtual Server Table", select the Virtual |
| Server settings you want to remove in the table and then |
| click "Delete Selected". If you want remove all Virtual |
| Server settings from the table, just click "Delete All" button. |
| Click "Reset" will clear your current selections. |
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)
65