SPECIFICATIONS |
|
RW30110 / RW30112 |
|
Power | 115V, 60Hz, 175W |
X Axis Movement | 400 mm / 15.7 in. |
Y Axis Movement | 350 mm / 13.7 in. |
Length | 925 mm / 36.4 in. |
Width | 650 mm / 25.5 in. |
Height | 440 mm / 17.3 in. |
Weight | 25 kg / 55 lbs |
Charlie Control Box Weight (with 5m of cable) | 3 kg / 6.6 lbs |
Pull Gun Weight (without wire reel) | 12 kg / 26.4 lbs |
RW30120 |
|
Power | 230V, 60Hz, 150W |
X Axis Movement | 1250 mm / 49.2 in. |
Y Axis Movement | 350 mm / 13.7 in. |
Length | 1510 mm / 59.4 in. |
Width | 830 mm / 32.6 in. |
Height | 430 mm / 16.9 in. |
Weight | 34 kg / 74.9 lbs |
Charlie Control Box Weight (with 5m of cable) | 3 kg / 6.6 lbs |
Pull Gun Weight (without wire reel) | 17 kg / 37.4 lbs |
NOTICE
In addition to the Safety Precautions in this manual, observe the following for equipment protection and care.
•Check that the pin holder is not burnt or not holding the pin tightly. If not, remove the ring holder, clean all the parts and squeeze the fingers of the pin holder together.
•Check the cables on the gun from time to time for damage. Replace as required.
•Check that the lift level is correct with lift level tool.
•Always store the tool in a clean dry space, safe from damage or pilferage.
•Always keep critical equipment markings, such as warning stickers and tags legible.
•Equipment repair should be performed by experienced personnel only.
•Do not use the equipment for applications for which it was not intended.
24 - RW30 USER MANUAL