Stanley Black & Decker RW30 user manual Exhaust Fumes

Page 9

SAFETY PRECAUTIONS

When not in use, remove the rod from the electrode holder.

Wear grease-free clothing such as leather gloves, a heavy shirt, hemless trousers, safety footwear and headgear.

Before welding, remove all flammable substances from your pockets such as matches or any type of lighter.

EXHAUST FUMES

Exhaust fumes from the motor can cause fatal accidents. Motors emit toxic exhaust.

Use the equipment outdoors in an open and well ventilated area.

When using the equipment indoors, evacuate the exhaust fumes well away from any fresh air intake vents.

MOTOR FUEL

Do not top up with fuel while smoking or when near a source of sparks or a naked flame.

Do not fill the tank to the brim – leave space for the fuel to expand.

Stop the motor and let it cool down before checking or topping up with fuel.

Do not spill fuel. If fuel spills, clean it up before starting the motor.

MOVING ENGINE PARTS

Moving engine parts such as fans, rotors and driving belts can cause serious hand injury. Articles of loose clothing can also get caught up in them.

Keep all trap doors, panels, properly in place or closed.

Only ask qualified personnel to remove the safety devices or other covers in order to carry out when necessary maintenance work or repairs.

To avoid the motor accidentally starting while carrying out maintenance work or repairs, disconnect the cable from the negative (-) terminal of the battery.

Keep hands, hair, loose clothing and tools away from engine parts.

After maintenance work or repairs, replace all trap doors, panels, covers and other protective devices before starting the motor.

RW30 USER MANUAL - 9

Image 9
Contents Robotic Welder General Information Table of Contents Weisbeck, Andy Declaration of ConformityLocal Safety Regulations Safety SymbolsShock Hazard Safety PrecautionsRays from the ARC Welding HazardsGAS Cylinders Exhaust Fumes Make Sure Sparks from the Engine Exhaust do not Start a Fire Claw Version OperationClamp Version Setting the Stick OUT Automatic Track Mode Automatic POINTS/FROG ModeCharlie Control Unit Controls Stop Setting the Date and Time Language SettingPrinting Data Manual Data EntryHello Operator DialogueYES Valid Return Torch to Initial Point Spacing x.xx mm WELD.TIME xxmin Error MessagesUnvalid Point Return to PO1 « on » TRANSLAMATIC‘s green light does not work TroubleshootingFeeding RW30110 / RW30112 SpecificationsRW30 Cold Weather Update KIT RW30 Heater Installed 2009 or EarlierAccessories & Parts Spare Parts Master Power Switch 2009 or Earlier Master Power Switch 2010 or LaterTemplate Guage RW30110 / RW30112 Parts List & Illustration RW30120 Parts List & Illustration RW30110 / RW30112 / RW30120 Left Side Illustration RW30110 / RW30112 / RW30120 Right Side Illustration Right Side AssemblyRW30110 / RW30112 / RW30120 Motor Board RW30110 / RW30112 / RW30120 Support Platform RW30110 / RW30112 / RW30120 Support Assembly Clamp Assembly Torch Support Parts List & Illustration Torch Support Pull GUN Illustration Page Stanley Hydraulic Tools