|
| OPERATION |
| ||
CONSTANT VOLTAGE WELDING |
|
|
|
For each wire feed speed, a corresponding voltage is preprogrammed into the machine through special soft- ware at the factory. The preprogrammed voltage is the best average voltage for a given wire feed speed. With synergic programs, when the wire feed speed changes the Power Wave will automatically adjust the voltage correspondingly.
Wave control adjusts the inductance of the wave- shape. (This adjustment is often referred to as "pinch". Inductance is inversely proportional pinch.) Increasing wave control greater than 0 results in a harsher, cold- er arc while decreasing the wave control to less than 0 provides a softer, hotter arc. (See Figure A.5)
FIGURE A.5
Wave Control +10.0
Wave Control 0.00
Wave Control
Current
Time